Measure once cut twice | on ElectriciansForums

Discuss Measure once cut twice in the Solar PV Forum | Solar Panels Forum area at ElectriciansForums.net

C

cablemonkey

Pass this every day and that rail just annoys me.....Sorry :seeya:
 

Attachments

  • [ElectriciansForums.net] Measure once cut twice
    rsz_2photo0055.jpg
    92.4 KB · Views: 237
lol solar pv!!! i just coudnt put myself through niceic mcs next time PICKING holes in my PAPER trail blaming ME when it dont tally! even though suppliers dont know what they sent me :) the whole solar exsperiance was the WORST ive had in 30yrs of being a spark! i pride myself on my work! when a jobs DONE its done! it helps if the industry behind u supports and helps u! not puts its head in the sand and lets u BLOW A GASKET!! M BLOODY C S !! no help when needed but will shaft u with non conformaties GALORE!
am i still bitch (in:)
 
A lot of companies go boom then bust when an industry takes off like PV has. Give it a year and as long as DECC aren't getting paid to knock off PV for the big 6 (still debatable) then the industry should calm down to a workable, profitable level albeit not nearly as lucrative as it has been over the last 12 months!

Most of the greedy fat cats will be finished with it in a year and the others will have liquidated leaving (hopefully) a niche selection of decent solar companies to fight out for the smaller profits, that my guess anyway.

Not had any dealings with the MCS/REAL side of things yet as up until January I was an employee, although things may change depending on how things pan out this year.

The sooner grid parity is reached the better! FITS just create chaos when you've got idiots (and thats being polite) in control of them!
 
Last edited by a moderator:

Reply to Measure once cut twice in the Solar PV Forum | Solar Panels Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
702
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
1K
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
3K

Similar threads

S
  • Article
L-shaped wall tile cuts - templating, measuring accurately any tips? There's a video on youtube of a guy templating for large format floor...
Replies
0
Views
107
Stoobloo
S
  • Question
Yes I touched on diverted neutrals when I went over guidance note 3 the first time but I’m doing a second round and going between all books whilst...
Replies
9
Views
502

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top