Menvier & Channel

[Ross1]

Hi guys,

can anyone of you tell me if menvier or channel fire accessories will be compatible with a (zircon) bardic Honeywell fire alarm system?

many thanks

 

[tazz]

Menvier and Honeywell are manufactures......Channel fire are just a wholeseller.....so forget channel, what equipment do you need to used with the Bardic Panel...??

 

[Ross1]

Ok I need 2 x sounder beacons, 2 x break glass call points, 1 x heat detector, 1 x standard detector. I also need to move 1 x existing break glass call point and 1 x sounders beacon 3 foot to the right.

Is is there special joint kits for FP cable?

By the way, this all has to be installed by end off play on Thursday.

Regards

 

[Phil L]

Menvier & Channel

Use Apollo s65 devices they will work fine and are readily available from most wholesalers

 

[tazz]

As above, with KAC 470ohm call points, Fulleon roshni/flashni`s......cable needs to keep integrity, so suggest any joints, are crimped in a 20mm gav through box, using 20mm fire rated stuffing glands. Plenty of good suppliers will have items delivered next day...
Hope this helps

 

[Ross1]

Thanks for your input guys, been very helpful.

much appreciated

 

[tazz]

Your welcome glad to help