More than 1 circuit on mcb | Page 3 | on ElectriciansForums

Discuss More than 1 circuit on mcb in the UK Electrical Forum area at ElectriciansForums.net

Joined
May 12, 2020
Messages
4
Reaction score
1
Location
Huddersfield
Hi, recently carried out an eicr at a rented property. There were 5x 1mm in a 6amp mcb for lighting.. my question is what code should I be looking at for this??
I am sure I have heard someone mention or read somewhere about overpopulating an mcb should be a code 2... but then i have also heard it’s all counted as 1x circuit so all the lights to the property are on 1x circuit.. which would be a code 3 recommendation they should be split.. advice would be welcomed.

cheers
 
[ElectriciansForums.net] More than 1 circuit on mcb

[ElectriciansForums.net] More than 1 circuit on mcb
BS 7671 definition...
 
could be worse. extra circuits jammed into incoming 25mm tails. seen that before.
According to ADT this is an approved connection method for alarms I'll have you know! So long as you use alarm cable sheaf on the cpc for a proper job.

Anyway I've code 2'd before now if conductors are not all securely connected which is nigh on impossible with 5
 
A RFC with 5 in a CB would worry me more.....certainly when it came to testing.
Still one circuit, though.
As previously stated, whatever the circuit, the N's and E's could cause problems.
 
This sounds like a wrong way of arranging circuits.
Question is ,what is the reason for wiring it in such unconventional manner?
It looks like a DIY job.
If I am the one on that site I would re arrange it straight away.

You can only rearrange it if there are unused ways in the consumer unit. Which there probably won't be, otherwise they would have been used for the extra sockets or whatever.
 
This sounds like a wrong way of arranging circuits.
Question is ,what is the reason for wiring it in such unconventional manner?
It looks like a DIY job.
If I am the one on that site I would re arrange it straight away.
Nobody is ever going to suggest the original scenario is the best way of going about things, but the OP's original question must be kept in mind. An EICR is being carried out, so the question has to be is five conductors in a single device compliant? Yes on its own, so no code, other factors such as adequacy of termination may mean it is not compliant, but that is an entirely separate issue whch woulld be coded for different reasons.
The issue of all the lighting being on one circuit is irrelevant if other circuits, such as power circuits will remain energised on failure of the lighting circuit. Division of circuits will be achieved. There is no requirement for more than one lighting circuit within an installation. No code for that either. I would however note both of the above, stating whilst compliant there are significant disadvantages (with an explanation) to the present arrangement which could be improved.
Those carrying out EICR's must remember ONLY non compliances can be coded, not personal preferences.
 

Reply to More than 1 circuit on mcb in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
380
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
956
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

  • Question
What is the distance from the point outside the house to the shed?
Replies
8
Views
783
  • Question
True. Although I'd hazard a guess that things like woodworm treatment are probably chemically quite similar? Don't know.
Replies
13
Views
1K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top