Moving the meter. | Page 3 | on ElectriciansForums

Discuss Moving the meter. in the UK Electrical Forum area at ElectriciansForums.net

Joined
Feb 24, 2010
Messages
992
Reaction score
126
Location
South east
Greetings.

A landlord has asked me to do an inspection of his property which I have done.

I noticed no bonding so I installed bonding and went round making sure each circuit had an earth and complied with
disconnection times.

I also noticed the main fuse and meter had no seals so I sealed both with security seals which I always keep handy.

Now the landlord wants me to move the meter up further so it sits higher on the wall and to do this I will have to extend
the cables/meter tails from the main fuse to the meter.

I have been advised this is a big no no and to call the electricity supplier, EDF in this instance.
I am little worried that I will get the blame for breaking the original seals and wondered what people thought was the
best thing to say to the engineer when they arrived.

Comments appreciated.
 
I would say the landlord wants it about eye height for a person that is six feet tall.

Or eye height for a bloke that's five foot standing on a milk crate but his flat cap might touch the ceiling.
It always annoys me when my 6'7" colleague puts things at 'eye height' then I have to stand on a box to reach it.

(For a while I wondered why his cat flap would touch the ceiling, then I realised I was mis-reading it!)
 

Reply to Moving the meter. in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
373
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
938
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

  • Question
The last couple of de-loops that I have been involved with had the single phase supply replaced with a three phase cutout (as I believe the DNOs...
Replies
5
Views
995
I would hazard a guess your electrician may be able to contact your DNO and have the switch swapped to a MFS very quickly..
Replies
13
Views
653

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top