My boiler wiring has not gone to plan! | Page 2 | on ElectriciansForums

Discuss My boiler wiring has not gone to plan! in the UK Electrical Forum area at ElectriciansForums.net

So it was personal contact and not through the thread, but what did you do to save the day? what was wrong? and how was it put right?
 
So it was personal contact and not through the thread, but what did you do to save the day? what was wrong? and how was it put right?
Boiler + happy hippy = boiler not working
Boiler - happy hippy = boiler working
 
So it was personal contact and not through the thread, but what did you do to save the day? what was wrong? and how was it put right?
Temporarily bypassed the zone valves so the system can work as a single zone! It’s only a small three bed! Happy Hippy will be returning after Christmas to fit a second Hive to split the property into two zones, I believe!

The programmer was wired directly into the boiler so when it was firing it up, it wouldn’t open the zone valves but instead just run through the auto bypass! Once Happy Hippy returns I imagine he’ll wire both receivers into the control box near the zone valves! A simple mistake which I see probably once a month! 🙂

But a long story short, what westward10 said!
 
Boiler + happy hippy = boiler not working
Boiler - happy hippy = boiler working
Jesus Christ Westward. I am actually crying with laughter😅.
Although the sad, worrying truth is that it may well be correct :D
Luckily @LmarshallSparks has convinced me to go on a heating course, specifically for the electrics, so when I return I will have learnt that you can't change a 2 zone system into a 1 zone, purely by willing it to happen.
 
Which heating course are you looking at? I could be interested in such a thing myself! A weakness for me most certainly.

£80 for a 2 day course, with food!
 

£80 for a 2 day course, with food!
wow, £80 covers good food for 1 to 2 days, depending on your preferences.

I would check with the provider that it is £80 for food and a free training course.
if not then it might be £74.50 for a training course and £5.50 for some soggy sandwiches.

Best of luck with your course, I am jesting just a little bit about the food but also have been on too many courses to list and know what they are like!
 
wow, £80 covers good food for 1 to 2 days, depending on your preferences.

I would check with the provider that it is £80 for food and a free training course.
if not then it might be £74.50 for a training course and £5.50 for some soggy sandwiches.

Best of luck with your course, I am jesting just a little bit about the food but also have been on too many courses to list and know what they are like!
Normally I would agree James! However at the Worcester factory’s the food is top rate! It’s highly recommended! I’ll be having a roast dinner both days!! 🙂
 
Normally I would agree James! However at the Worcester factory’s the food is top rate! It’s highly recommended! I’ll be having a roast dinner both days!! 🙂
Unfortunately the days off food being served at say an initial verification course or health and safety etc are gone from my areas. I can remember doing a course in Inverness and we had a banquit, top notch scran ,spaghetti bolognise, beef stew and dumplings the lot .select seem to be miserable gits
 
I did an NIC run EV course a couple years ago at a posh(ish) hotel in Edinburgh. They had laid on a sandwich buffet, nice enough spread, and the free coffee from hotel barista….
Most recently did a few green courses and my 18th update at the local college…. Cheap cafeteria, but they did have the full Scottish on a roll option….. square and link sausage!



Ops…. Kinda drew the thread off tangent. 🥪🥪🥧☕☕
 
Careful @littlespark or we might get further off track re the merits of link vs square sausage, what sauce if any, and the ingredients of a "full Scottish" and whether beans should be included...
again!
 
I did an NIC run EV course a couple years ago at a posh(ish) hotel in Edinburgh. They had laid on a sandwich buffet, nice enough spread, and the free coffee from hotel barista….
Most recently did a few green courses and my 18th update at the local college…. Cheap cafeteria, but they did have the full Scottish on a roll option….. square and link sausage!



Ops…. Kinda drew the thread off tangent. 🥪🥪🥧☕☕
link every time and ketchup on a real glasgow roll .we get so called glasgow rolls up here and there garbage ,it must be a closely guarded secret recipe in the central belt lol
 

Reply to My boiler wiring has not gone to plan! in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
691
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
1K
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
3K

Similar threads

Thanks I understand it now just getting to grips now with the different types and different ways of wiring them
Replies
4
Views
280
If you bypass the microswitches you'd need to incorporate a couple of contactors or relays to avoid each zone back feeding each other. The...
Replies
5
Views
315

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top