D
DurhamSparky
when not playing with single phase and putting in ip rated down lights I maintain this stuff.... stops me getting bored i guess...!!
Last edited by a moderator:
-
Please use style selector to select BLUE AND WHITE. If you are not already on it. This notice will go once you're on the correct style.
my full time job
D
DurhamSparky
tell me about it!! last place i worked a SSE emplyee was cooked inside out from a HV sub on site! (albiet few years before i worked there) although the scorch marks and blast area still had a "engineer" shaped outline in it...!
he made his own castell key so no sympathy!
he made his own castell key so no sympathy!
Hawk81
-
I can't believe this post. It is unnessary, unhelpfull and stinks of jealousy. I have no reason to doubt steve.
I believe him because he has said so. No reason to doubt Durham. Anyway this has now become a reaction.
There are many great members on here that give up their time and efforts to give advice to those who need it and Durham is one of them. I have never seen one of his posts that I would question. Continue your good work.
There are many great members on here that give up their time and efforts to give advice to those who need it and Durham is one of them. I have never seen one of his posts that I would question. Continue your good work.
Nice post there durham .....proper work great stuff. Not sure if things have changed but in that UPS Battery room noticed the flours and the grid switches were not sealed type, are the batteries then non vented type. I remember at an hospital I did we had to use sealed lights, switches and sockets, but this was a few years ago and may have just been NHS spec.
Not sure also if it's the camera angle but it looks like it would be a bit of a task to replace any of those batteries on the top level as they seem close to the lights.
Not sure also if it's the camera angle but it looks like it would be a bit of a task to replace any of those batteries on the top level as they seem close to the lights.
D
DurhamSparky
the grids are standard MK metaclad range and teh lights are the usual vapour proof fittings..!
the batteries in question are sealed and thus give of no gassers during charging and dont require topping up so risk of explosion due to high hydrogen levels are reduced if not entirely removed..! we do have a natural passage of air through the room just on safe side!
top level batteries require a table lift and step ladder!! plenty of room..!! just about to change 1200 batteries on another site!! should be fun!
the batteries in question are sealed and thus give of no gassers during charging and dont require topping up so risk of explosion due to high hydrogen levels are reduced if not entirely removed..! we do have a natural passage of air through the room just on safe side!
top level batteries require a table lift and step ladder!! plenty of room..!! just about to change 1200 batteries on another site!! should be fun!
S
sparkiegaz
just fitting some new lights in a school, putting presence detectors in to turn lights off. why people cant use the switch when they leave i dont know,,,,treading water til shop referb starts in few weeks.
Hi everyone,
If...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
