Napit | on ElectriciansForums

Discuss Napit in the Business Related area at ElectriciansForums.net

P

peck06

I know this subject has been widely discussed on the forum so apologies for the thread, but could some one give me a difinative guide to the NAPIT asessment, i.e. what documents I should have in place? What guides I should have like the BRB, GN3 etc? and what I should expect to have to do during the assessment? Also does the job example have to be domestic or could it be a commercial project that I have completed? Do I need the job to have been signed of by building control or could I show a newly completed job and assuming I pass the assessment notify through NAPIT?

Thanks for your replys.
 
you need the brb. the osg, gn3, calibrated tester/s. ask napit if a commercial job is acceptable. usually with napit, they allow you to notify through them after assessment. (assuming you pass, and cough up the readies).safe isolation, testing for dead, proving your voltage tester before and after, and general mtest proceduyres. ffs dont confuse r1with R1 etc.
 
Last edited:
i have been with NAPIT since Part P came out, and every inspection has been the same decent bloke. He asked to see all my apprenticeship and subsequent training certificates the first time around. He also wanted to make sure i had the Part P approved document (PDF), a Health and Safety Statement, Guidance on waste disposal, memorandum of guidance on EAW(PDF), customer complaint form - these are all available on their web site but if you need them let me know and i'll upload them! HE also wanted to see the calibration certs for my testers, insurance etc.

My assessment was a domestic one, he asked me to go through various things that had been done, and even to take a couple of switches off to see if i had marked the switch wires. He then went through a few questions on the regs, nothing too complicated - you dont need to know the answer, just how to find it in the BRB. Like Tel say's, check with NAPIT re the commercial assessment. They are just checking that you are competent really so i cant see why they cant do that at a commercial site

Good luck
 
dont panic they are very helpful at napit .all there inspectors are working sparks so just keep the kettle on and they will guide you
through it .all they want to see is that your competent and arent going to kill anybody. oh and they want your money.
 
dont panic they are very helpful at napit .all there inspectors are working sparks so just keep the kettle on and they will guide you
through it .all they want to see is that your competent and arent going to kill anybody. oh and they want your money.

They can gladly have my money and I only want to kill the tart on the end of a phone at the bank.
Should be ok then...........
 
Had my Napit assessment on Saturday it went great the assessor was spot on, just asked questions that are relevant and in no way tried to trip me up had a good crack with me the whole time to keep me at ease.
 
I have my assessment on wed so i hope mine goes as well as yours. oh and congrats
Good luck James. You will be fine. Relax, prepare yourself, and enjoy..... it is your money and I want you to get evrything you can out of the experience, remember it is a process to show you are competant.
When you pass, the beers are on you,
Good luck and enjoy.
 

Reply to Napit in the Business Related area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Hope everyone has had a great Christmas and here’s hoping we all have a better new year coming our way ! Remember our riches aren’t measured by...
    • Friendly
    • Like
Replies
11
Views
525
  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
758
  • Sticky
  • Article
Thanks so much for sharing this with us! I’ll definitely take a look, it seems like there are a lot of useful and interesting products. The idea...
    • Like
Replies
5
Views
2K

Similar threads

Thought I'd update this. Finally had my assessment today. I chased them on Friday morning as it'd been about 10-12 weeks since I'd actually made a...
Replies
5
Views
2K
  • Question
I think the point made here on knowing the calculations for verification of results etc is a good one. With one question leading onto the next not...
Replies
18
Views
1K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top