Need replacements for these.........

[Gavin John Hyde]

Got 2 bollards at a customers premises. they have stopped working, got water ingress, the covers were not put on correctly.
They are emergency light packs. Made by a company called Nu-era lighting which it appears went into administration.
Went in kew, denmans, cef and edmundons and got blank stares, nobody could suggest a replacement pack that would go in do the trick, some didnt have a clue what i was even on about.
They sit in the bollard with the bracket at the top of tube, with bulb facing up into top of dome on bollard.
I have seen them elsewhere but cant for life of me recall where. anybody know of any retro fit kits or supplier for these emergency lighting packs for bollards? removing bollards is not really viable due to risk of damaging the paved area, also seems excessive when its just the gubbins that died.

 

[Dustydazzler]

Try EBay

 

[The Ghost]

What exactly has failed if I may ask? The whole control gear or what, it looks pristine condition. But anyway you could easily get a control gear and emergency gear for it and replace the lamp holder and go LED.

 

[DavidSpark]

Order up replacement ballast and batteries to go with.

As you can see they are model IM418.

Wholesale Discounts elp IM418 13/18w DE/TE Combo Emergency Ballast Best buys LED Lamps | Fluorescent Tubes | Control Gear - http://www.all4electrics.com/elp-im418-13-18w-de-te-combo-emergency-ballast.html

Best shop around online for the best deal or pass the cost on to the customer, very simple fix, like for like. Will come back to life better than the day they went in!

 

[Gavin John Hyde]

Batteriee dead easy to replace but the ballast is dead when i opened it up there was moisture inside from condensation. There were no covers on the gear trays.
Im thinking i shall have to swap bits out and cover it up.