Needing NVQ 3 for Part P registration.

[Rampage]

It would appear from next year you need to have NVQ Level 3 to become Part P registered. Is this just to be classed as a supervisor or as a domestic installer as well?
Won't this lessen the chance of someone installing being registered?
I've done/doing 17th, Inspection & Testing and Design & Verification, is this no longer good enough to register?
I've not really got 3 years spare to do the NVQ, and if I did it would be on the HNC not the NVQ!

 

[sparksflying]

You dont need three years to complete the NVQ if you are a practicing operative. The NVQ can be completed in weeks/months if you are already working in the industry and are competent.

See this link for details http://www.electriciansforums.net/e...trical-nvqs/46538-ecs-jib-card-nvq-3-am2.html

 

[ezzzekiel]

and from what ive heard anyone registering next year have two years to complete the nvq

 

[Rampage]

Just had an email back form one of the scheme providers saying pretty much the same.
Although they said you need the NVQ 3 OR 2 years experience working. Which would mean by the time you've put off the NVQ for 2 years you would have 2 years experience?!

 

[lockhes]

I spoke to niceic about this few weeks ago and never mentioned this as I don't have it

 

[JUD]

According to Elecsa's Part P assessment guide the C&G 2382 is still sufficient to register

.

 

[fuzzydunlop]

Still makes me laugh every time I see the 17th being the only requirement to join a scheme

When I tell friends/family the requirements to work in someones house and what it takes to get them they're gobsmacked

 

[SirKit Breaker]

2391 is currently a level 3 qualification.

From next year it is being phased out and replace with 2394 Initial Verification (Level 3), 2395 Periodic Inspection and Test (Level 3), and 2395 Design and certification (Level 4).

These along with the 2382 and 2377 are being aligned with all the other quals on the QCF (Qualification Credit Framework) this is the same line that a NVQ takes. So you will get credits for each part of the qualification that you do.

I cant remember the full works, i have left the C&G info at work, but i do know 2394 consist of 1 practical assessment, 1 written assessment and 1 online assessment.

All in all for 2394/5 and 6 there will be about 7 assessments in all to gain all 3 qualifications.

The 2382 regs course is staying fairly much the same, but the 2377 is being more formalised and will include a properly assessed practical assessment on both class 1 and 2 equipment including correctly completing the paperwork, an online assessment of 50 questions for 1hour 45 minutes, unlike the now 30 questions and a hour.

I will post more info as and when i get it

Cheers...........Howard

 

[Marvo]

Relocated to Electrical Regs forum.

 

[BES]

Had my assesment today with Elecsa ask this question reply was "no change till 2013"?

 

[Rampage]

I heard that yesterday too!

Nothing on the IET website, and they don't reply to emails about it either!

 

[stujham]

I found this, hope it clears things up.....

It has just been confirmed that the current method for registering domestic installers will continue until April 2013. This provides more time for anyone looking to qualify under the current scheme to get trained in confidence that they will be able to progress their career following the training.

Also the new Domestic installers NVQ has been delayed until June 2012. You can find out more in this pdf here: http://uploads.cycleapp.com/gw4s35eg2n/file.pdf

Stu
​

 

[Flying Ninja]

Another waste of time and money then, The NVQ 3 is run by the colleges, depending on the one you go to it could take a week or a year. I had an apprentice that did it with a mate of thiers over a half term. They got a camera and some ppe and staged photos in one of thier homes. Two weeks later they had passed and still could not wire a 1 way lighting circuit or find a fault. Is the answer to have one uniformed body doing the assesment to make it fair to all?

 

[stujham]

I had been out of the trade for over 10 years and recently made redundant decided to look at going back to doing some house bashing. Was misinformed on the requirements and then went on a "Part P course?" and was quite shocked at some of the "trainees" hoping to become "qualified".

 

[JUD]

I found this, hope it clears things up.....

It has just been confirmed that the current method for registering domestic installers will continue until April 2013. This provides more time for anyone looking to qualify under the current scheme to get trained in confidence that they will be able to progress their career following the training.

Also the new Domestic installers NVQ has been delayed until June 2012. You can find out more in this pdf here: http://uploads.cycleapp.com/gw4s35eg2n/file.pdf

Stu
​

Passed Elecsa assessment this morning and have been told this too.

The reply I got was "2013 if at all​"