New Member needs help with power to loft

[Scouseian]

Hi everyone new member here looking for advice.

Im looking at putting sockets in my loft. I see the question has been asked many times but I cannot see any questions relating to my issue.

I have a hive multizone and the electrical supply to operate the valves for upstairs and downstairs is in a cupboard upstairs. Can I take a feed from this electrical supply feeding the valves upto the loft?

I have attached a picture of the valves and electrical supply.

Thanks for your help

Ian

 

[Scouseian]

sorry picture did not attach. see attached

 

[Scouseian]

sorry guys new to this but my photo isn't showing even though it says picture uploaded!! any advice?

Thanks

 

[Spoon]

Welcome to the forum mate.
Are you saying you want to tap into the Hive circuit to power sockets that you are adding in the loft?

 

[Spoon]

sorry guys new to this but my photo isn't showing even though it says picture uploaded!! any advice?

Thanks

Try to 'Copy/Paste' the images into the posts. That might work better.

 

[Scouseian]

yes pal id like to tap into hive circuit.

 

[Scouseian]

picture

 

[Octopus]

yes pal id like to tap into hive circuit.

Probably not the best plan ..........

Need more info really ................

 

[MDJ]

If you are a qualified Electrician you should know if the cable you are considering extending can handle the load of the Hive and whatever you intend to plug into the sockets in the loft connected to it yes? there is your answer.

 

[Scouseian]

No I'm not a qualified electrician but thanks for your response. I should have made myself clearer. I'm not tapping into the hive I would be tapping into the supply feeding the central heating vales. I've read questions regarding taking cable from an existing socket but noticed the power supply feeding the valves for the central heating. I hoped this would be easier but maybe not. Id upload a picture but I've tried 4 times and it won't upload!!

 

[MDJ]

No I'm not a qualified electrician but thanks for your response. I should have made myself clearer. I'm not tapping into the hive I would be tapping into the supply feeding the central heating vales. I've read questions regarding taking cable from an existing socket but noticed the power supply feeding the valves for the central heating. I hoped this would be easier but maybe not. Id upload a picture but I've tried 4 times and it won't upload!!

Well I won't help then, but good luck and hopefully someone will steer you across to the DIY area.

 

[Octopus]

hum ........... maybe you should get a competent spark involved?

 

[Scouseian]

Ok thanks anyway.

 

[HandySparks]

If you're adding sockets you should take the supply from the socket circuit, not the central heating controls.

 

[Scouseian]

thanks handyspark. There is a 230v box feeding the valves. If I could upload a picture you could see. its driving me nuts. as MDJ said ill try the DIY section