New User - Help Required Sourcing Mini Trunking End/Stop Cap

[JagSingh]

Hi All Members

1st Post as a new member.

Can anyone Please advise where I can source a 16x25 end/stop cap as shown in photographs

Kind Regards.
Jag.

 

[westward10]

Ditch it and do a proper job.

 

[onions1066]

 

[onions1066]

Ditch it and do a proper job.

Proper job? What is wrong with that?

 

[Dave OCD]

Oh I dunno thought maybe it was MT trunking and if it was he might be able to identify what he wants. Or he could take a trip to B&Q, Homebase. Wickes, Maplins, CEF, Eddies and look for himself, or Screwfix or Toolstation. Do you have any bright ideas that could help him? I just though that was a good idea, because I can't identify trunking by just looking at it unlike some,

Pete, no need to justify yourself to me, I think you quoted my post by mistake ?

 

[Pete999]

Pete, no need to justify yourself to me, I think you quoted my post by mistake ?

You asked me why Dave, or have I got it wrong?

 

[westward10]

Proper job? What is wrong with that?

The cable is not suitably restrained from the fcu, the p clip serves no purpose other than offering cable support. If you can pull that cable from the fcu, which you can then it is not restrained.

 

[onions1066]

The cable is not suitably restrained from the fcu, the p clip serves no purpose other than offering cable support. If you can pull that cable from the fcu, which you can then it is not restrained.

Right I thought you was referring to the end cap. I will put my attitude right back in my bag and toddle off

 

[Dave OCD]

Only as you'd quoted my post in your suggestion Pete, mine was only commenting over the nibbled out bit. Anyway not to worry mate, I think I'm a bit dozier than usual tonight, busy day and it was a hot one too.

 

[7029 dave]

That is a stop end that has had a chunk out of it.

 

[onions1066]

That is a stop end that has had a chunk out of it.

It's an external angle! Look at the sides you can see where it changes from rounded to flat where part has been cut off

 

[Octopus]

Why do you need another one?

 

[onions1066]

Did you manage to get one?

 

[JagSingh]

Thank you all for your informative & helpful replies. I will follow "onions1066" advice and use an external angle. I had a look at Marshall Tufflex website and was unable to locate the part. Any idea of the name and part number, for future reference ?

Kind Regards.
Jag
PS. Amazing forum

 

[onions1066]

It is MK trunking angle. Go to any wholesaler apart from CEF as they don't deal with MK. Edmundsons stock them 100%

 

[onions1066]