Newbie: stuck fitting a new ceiling rose | Page 2 | on ElectriciansForums

Discuss Newbie: stuck fitting a new ceiling rose in the The Welcome Forum area at ElectriciansForums.net

This is a piece of copperclad aluminium T&E and I have scratched the red to reveal the aluminium but it isn't very clear. It was made by fitting an aluminium bar into a copper tube and stretching it.
20170916_191447.jpg
 
When a mate calls you up to let you know that his lights aren't working and can you help him out you ask "have you done anything" the answer is "noooooo" when you turn up you notice a new light fitting in the front room, you know where this is leading...........
 
Just a guess but id be likely to say the black wire on the left most of image folded back on its end is switched live. if you look at the image there is what appears to be a black mark a different shade from the insulation on it, possibly pen marking, or glue residue from tape etc...
 
Like everyone before probably best to get a spark in but the best guess is can give is the three reds go n the loop the two blacks in the neutral and the one remaining black which is doubled over goes in the live. Again rather you get a spark in .
 
Again get a spark in . But to could pull the doubled over black and the red in same cable to one side connect the two remaining red together , two remaining blacks together have the light switch in the off position and check the other light s in the house to make sure they are working , if this is so and providing the the room which you light is being change only has one light in it then it's likely the the doubled over cable is the switch wire and can be connected as said in my last post . If this feels too much for you DON'T DO IT
 
Thank you everyone for your replies and advice. Much appreciated (not the curtain comments though - it's my little girls bedroom). I've taped and covered the live cables and I'm calling an electrician. It's way too complicated for me to tackle. I'm so confused by it all and my impression of electricians is very high. FYI the SL cable was in the earth on the old Rose. Also the three earths are all twisted together up in the ceiling - I've now learnt they need to be sleeved in the new colours etc but I'm going to get a pro in. Thanks everyone.
 

Reply to Newbie: stuck fitting a new ceiling rose in the The Welcome Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
380
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
957
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

Any professional forum member in or near Somerset help out? Needs a little more help than we can offer from afar.
Replies
8
Views
707
Thanks will give that a try in a little while Cheers Writing to say thank you very much for that advice, its worked! Really appreciate the help
Replies
6
Views
870

Search Electricans Forums by Tags

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top