NICEIC Certification Scheme NICEIC back tomorrow ! Help required please

[ipf]

Just show him you know what's required, then. Good Luck.

 

[Soulsurfer]

Just show him you know what's required, then. Good Luck.

Thanks for the advice / help, much appreciated.

 

[westward10]

Ahh of course as only 6mm in the T&E for cpc.

Not the cpc size but the overcurrent issue once you apply the 0.725 factor to the 3036 fuse.

 

[Soulsurfer]

All done & passed
He went over everything and including the twin and earth sub, but told me that due to all flats being bonded to a gas main riser ( no longer in use but extraneous ) and main water and with all the flats being run in 16mm sq that the 6mm would be fine as there are effectively a large system of parallel paths down to earth and that there are no thermal effect issues of the existing cpc.

 

[westward10]

Well done you can chill a bit tonight.

 

[Soulsurfer]

Well done you can chill a bit tonight.

Thanks mate & all who helped ! Finished messing with certs and tests at 02:30 this morning ! Now I'm off to find cold lager as it's roasting here.

 

[hasel5]

Got my inspection on Monday Just a pain as so busy and a new inspector so will be having to show I can test etc been down this route 5 times now different assessors.

Should be in your notes guy can test so no probs

Rant over

 

[Soulsurfer]

Got my inspection on Monday Just a pain as so busy and a new inspector so will be having to show I can test etc been down this route 5 times now different assessors.

Should be in your notes guy can test so no probs

Rant over

All the best for it mate.

 

[hasel5]

All the best for it mate.

Its a no brainer just a pain in the arse as a day out of my life for a guy to tick some boxes and then flog me insurance courses and all that