Discuss Niceic logo in the Certification NICEIC, NAPIT, Stroma, BECSA Forum area at ElectriciansForums.net
hi all, is anyone out there niceic DI only but uses the logo without the "domestic installer" written underneath.
I would like to register to sign off my domestic stuff legally but dont really want to give the impression that I'm only a DI (as I'm qualified in both domestic and commercial sectors.
So by just using the logo and not putting approved contractor underneath would I be breaking any rules? I've emailed nic to no avail so just wondering if anybody already does this.
the rules for using the NICEIC are set NICEIC domestic or contractor you can not change the logo to suit your self they have guide lines .
Easy' register as an approved contractor
Easy' register as an approved contractor
Costs an extra 500 and dosent benefit me. If it's a no go I'll go without the logo I guess. I wasnt looking to deface there logos, I have seen standard nic logos that say nothing else just wondering if anyone else has used them
Costs an extra 500 and dosent benefit me. If it's a no go I'll go without the logo I guess. I wasnt looking to deface there logos, I have seen standard nic logos that say nothing else just wondering if anyone else has used them
I doubt you can do that otherwise many domestic installers could give the impression they are approved contractors. Wait for a response from them but at the end of the day it is their logo so they set the rules.
-
Arms
Supporter
V.Nearly Esteemed
Costs an extra 500 and dosent benefit me. If it's a no go I'll go without the logo I guess. I wasnt looking to deface there logos, I have seen standard nic logos that say nothing else just wondering if anyone else has used them
It is prohibited. Their guidance on the use of logos is very explicit about this.
As stated, if you don't want to come across as being a "Domestic Installer" then get enrolled in the Approved Contractor Scheme.
I thought domestic installer was aimed at kitchen fitters, bathroom installers etc and AC was for sparks?
-
Esteemed
Arms
Supporter
Patron
I thought you just had to demonstrate competence in a couple of small commercial jobs and then you could register as approved, didn’t know the cost jumped £500!......should’ve known really ?....I think the only scheme that don’t differentiate in their badges is napit?...but could be wrong
I thought domestic installer was aimed at kitchen fitters, bathroom installers etc and AC was for sparks?
No, domestic installer is for anyone who wishes to join a CPS for the purposes of part P but doesn't want/need to be an approved contractor.
Thanks for the responses guys, sounds like either not advertising I'm nic then or looking into napit. I'm a bit sceptical of napit as most people think you need to be "nic qualified" ?
but still may be a better option cheers
Reply to Niceic logo in the Certification NICEIC, NAPIT, Stroma, BECSA Forum area at ElectriciansForums.net
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
Good to know thanks, one can never have enough places to source parts from!
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Hi Charlie, this link to the C&G website below has their email address that you have to contact for permission. As someone at the same stage as me...
It applies to commercial if it shares the same supply as a dwelling.