Nvq 3 - j.i.b

[charliefarli]

Hi all,am in need of a bit of help.if anyone can i would be gratefull.just been searchin all over the internet for somwere to take my nvq 3 but cant seem to find anywhere that does it in my area. I am in the IG10 Area which is loughton in essex but this is in close proximity to east london. i have my peo nvq level 1 my c&g llevels 2 and 3 and done 17th update and am currently studying the 2391 at a local college but they do not do the nvq level 3 and this is what i need to obtain a J.I.B card with an electricians grading,at d mo i only have an adult trainee stage 2 card even though been working full time as sparks for about 6 years now and do not regard myself as a trainee at all.but because i did not do a proper apprenticeship and went to college in the evenings off my own back i need nvq to get this card.has anyone else had this problem to and are there any other ways round it or do you have to do the nvq?and to do the nvq do you need to be employed or isit ok to be self employed and do it?help would be much appreciated guys

 

[ezzzekiel]

lots of places do it online for about £500ish check out the courses section details of various providers in there.

did mine free through local college

 

[charliefarli]

thanks for reply. so basically my local college does not need to do it for me to do through an online means and ask the college to use there facilities to do assighnments or watever?

 

[ezzzekiel]

no everything will be run through the training provider you sign up to, you provide them with all digital evidence (photos, videos, witness statements etc) some require site visits, some do not and prices can vary wildly so shop around and check reviews before you pick a certain one.

 

[charliefarli]

o rite so need to go college at all.this is very handy.fanks for help.i will start lookin around now

 

[dfitzplugs]

thanks for reply. so basically my local college does not need to do it for me to do through an online means and ask the college to use there facilities to do assighnments or watever?

Just completed my Nvq 3 and i used Delta Electrical Training Ltd.
You can do it online and the help with the course was excellent
Cost £550 ish but was well worth it as they were very helpful!

Good luck

 

[kablue2000]

Just completed my Nvq 3 and i used Delta Electrical Training Ltd.
You can do it online and the help with the course was excellent
Cost £550 ish but was well worth it as they were very helpful!

Good luck

second that I used Delta electrical training and got it done quite quickly.6 months but was lucky enough to have varied work to complete it.

 

[ezzzekiel]

what quals did you need to have before enrolling on nvq3 with them?

 

[kablue2000]

what quals did you need to have before enrolling on nvq3 with them?

2330 level 3
2391-10
2377
2382

 

[dfitzplugs]

2330 level 3
2391-10
2377
2382

Don't think you need ; 2382 or 2391 to do Nvq3 as i have 2360 part 1 & 2 and am doing my 2382 in a couple of months!

 

[ezzzekiel]

was just checking as i was under the impression that 2330 level3 or equiv was a prequisite and it appears to be so

 

[fingz999]

is it the 2356 you on about? as if so you need to register before december as its being stopped and replaced with the 2357

 

[dannybruff]

i've just started mine with delta, the price must have gone up unless they forgot to add vat cos mines costin £699. you only need parts 1 and 2. just need to start takin pics of pretty much everything i do and pick and choose what i need.

 

[dfitzplugs]

Make sure you take pics of everything you do as these can be used to cover many of the units !

 

[DurhamSparky]

i did mine with Delta and they were loads of help...!!