Outdoor cable tensioners | Page 2 | on ElectriciansForums

Discuss Outdoor cable tensioners in the UK Electrical Forum area at ElectriciansForums.net

K

kevhughesbeams

Hi,
Looking for some advise on suitable cable tensioners to support overhead feed from main dwelling to an outbuilding. Distance is approx 30 feet and cable will be 2.5mm T&E. Any guidance on suitable suppliers of equipment to help fix and support cable greatly received.
Thanks
 
Is there really any point mentioning such things? I got the impression from the OP that he wasn't even going to put a catenary up and was looking to just fix the T&E at each end the same as an overhead line.

To be honest I recon he’s a builder or farmer wanting free advice. I don’t believe his profile.
More than once I’ve seen bricks ripped out of walls due to bad anchorage.

As far as I’m concerned he can do what he wants.
 
To be honest I recon he’s a builder or farmer wanting free advice. I don’t believe his profile.
More than once I’ve seen bricks ripped out of walls due to bad anchorage.

As far as I’m concerned he can do what he wants.
i wouldn't like to put a heavy pulling load on a wall like that with how poor some motar is,
 
[ElectriciansForums.net] Outdoor cable tensioners

No insulation break down after 20+ YEARS.

Boody thing is Twisted and stretched to buggery though and is only fit for the scrap bin, lol
 

Reply to Outdoor cable tensioners in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
257
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
739
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
721

Similar threads

See there is the problem. I can put back to way it was. Is it safe, in my opinion NO!! It's wasn't safe before the incident. No Fused Spur...
Replies
9
Views
514
When I was on the electric board We had a pair of pillocks connect a housing estate to a very large genset, the n lead was in two parts and not...
2
Replies
28
Views
3K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top