T

Thewiz

Now.... In the many years iv been in this industry I have seen a oven and a hob share the same 6.0mm cable.

I was asked today if it was possible to come off a oven supply a day run a 6.00mm cable to a fcu and for the fcu to a gas hob used for ignition of course.

I was thinking as long as the fuse is rated correctly to protect the 2,5mm and the totsl load does not go over the rated MCB ect.

Has anyone used this before,?
 
Now.... In the many years iv been in this industry I have seen a oven and a hob share the same 6.0mm cable.

I was asked today if it was possible to come off a oven supply a day run a 6.00mm cable to a fcu and for the fcu to a gas hob used for ignition of course.

I was thinking as long as the fuse is rated correctly to protect the 2,5mm and the totsl load does not go over the rated MCB ect.

Has anyone used this before,?

Ive never done this before,mainly because I wouldn't want the potential current of a 6 mm cable burning out a 2.5mm :)

Ib<In<Iz
 
look up the reg. that geoff posted.
 
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Advert

Daily, weekly or monthly email

Thread Information

Title
Oven spur.
Prefix
N/A
Forum
Electrical Wiring, Theories and Regulations
Start date
Last reply date
Replies
11

Thread Tags

Tags Tags
oven spur

Advert

Thread statistics

Created
Thewiz,
Last reply from
Geordie Spark,
Replies
11
Views
1,408

Advert

TrueNAS JBOD Storage Server

Back
Top