Overhead property supply clearance requirements | on ElectriciansForums

Discuss Overhead property supply clearance requirements in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

cloudy

DIY
Joined
Sep 4, 2019
Messages
3
Reaction score
0
Location
UK
Hi, we have a single phase overhead supply to our property, and are constructing a garage with a corner near the center of the ~15m span. What is the minimum separation to the structure? Is it possible to secure the cable at the midway point on the new structure?

Thanks!
 
The cable is fully insulated if that helps...

Depending on the age of the supply it could be paper insulated with red lead jute binding or hard drawn VIR, both by now will be knackered and dangerous. I wouldn’t touch ether with a barge pole.

Get in touch with your DNO.
 
Does this cable only supply your property or does it go on to supply another one?

You need to speak to the D.N.O / cable owner, they will assess whether they need to fit extra protection or even divert the cable before work starts.
And then to advise what further work is required.

I would speak to them immediately as I wouldn't be surprised if they have the legal right to stop you working adjacent to it.
 
Re DNO requirements: When workmen on a roof, they must not be able to touch the O/H cables. I think the guide line is, plus 1 meter further than average persons out stretched arm.
There are other issues also. DNO guy will discuss with you. Are the existing O/H cables old ?
If so DNO may alter / replace FOC
Do they feed other properties ie neighbour?
Would it be possible to go underground? You dig reinstate trench, DNO do the electrical connections, to keep any costs down.
 
Re DNO requirements: When workmen on a roof, they must not be able to touch the O/H cables. I think the guide line is, plus 1 meter further than average persons out stretched arm.
There are other issues also. DNO guy will discuss with you. Are the existing O/H cables old ?
If so DNO may alter / replace FOC
Do they feed other properties ie neighbour?
Would it be possible to go underground? You dig reinstate trench, DNO do the electrical connections, to keep any costs down.
Driver man the guideline is 28 meters
 

Reply to Overhead property supply clearance requirements in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
381
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
959
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

Your kWh figures are giving you consumption averaged over each hour period, but don't give an indication of total instantaneous current. To try...
Replies
9
Views
1K
Given that a lot of EV's only charge from one phase when connected to a 3 phase chargepoint does the customer really need a 3 phase chargepoint...
Replies
1
Views
617

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top