Part P opinion needed | on ElectriciansForums

Discuss Part P opinion needed in the Australia area at ElectriciansForums.net

sparks1234

-
Arms
Joined
Mar 30, 2009
Messages
1,249
Reaction score
87
Location
Hertford
A colleague of mine has been working for a certain client and it has come to light that for whatever reason he did not issue a certificate or register the job as we all know we should.

Another sparks has gone to the same house and an earth reading was slightly high and he asked to see the certificate from the last works carried out.

The work my colleague carried out was in 2005, so at least 4 years ago.

Now, nobody is saying that as no certificate was issued and no registration was done is correct.
But, my question is, what comeback could there be after 4 years?

For what it is worth, he has certificates etc for all other jobs for all other works done, this is an admin error.
 
Dont worry about it no-one been injured or killed no-ones gonna pay legal cost to bring you (oops your friend i mean) to justice, up untill the last 10yrs certs rarely got issued unless requested
 
Doubt if anyone will give a monkeys really...the LABC have got enough on their plate as it is, and with the general election looming, the majority of the LABC guys will be worrying about cost cutting and jobs etc.

Yooj
 
A mate of mine went to a disaster of a job last year, because no one had been injured the LABC weren't interested,
H&S weren't interested for the same reason & neither were trading standards!
laughable isn't it!
 
Now, nobody is saying that as no certificate was issued and no registration was done is correct.
But, my question is, what comeback could there be after 4 years?
.

Are you referring to failure to notify?
If so then I think the ability to bring to court has long since expired.
I read somewhere that the offence of not notifying to LABC is same level of crime as speeding offences etc. so must be brought to magistrates within 6 months.

Cant remember where I read it so if someone can provide a link that would help, as I dont like speading rumours :D
 
Dont worry about it no-one been injured or killed no-ones gonna pay legal cost to bring you (oops your friend i mean) to justice, up untill the last 10yrs certs rarely got issued unless requested



Are you referring to failure to notify?
If so then I think the ability to bring to court has long since expired.
I read somewhere that the offence of not notifying to LABC is same level of crime as speeding offences etc. so must be brought to magistrates within 6 months.

Cant remember where I read it so if someone can provide a link that would help, as I dont like speading rumours :D

Anyway, yes he did fail to notify and also fail to produce a certificate.

Interestingly, the sparks that is now picking up the works at the house has condemned the fact that he has not put a fire hood over the low voltage transformers in the ceiling void.
 
Last edited:
Interestingly, the sparks that is now picking up the works at the house has condemned the fact that he has not put a fire hood over the low voltage transformers in the ceiling void.

Is that a requirement then?
I thought fire hoods were a requirement when the room above was a different fire zone.
With the exception of an attached garage a house is usually 1 zone isnt it?
 
Interestingly, the sparks that is now picking up the works at the house has condemned the fact that he has not put a fire hood over the low voltage transformers in the ceiling void.
Also I thought fire hoods were for the luminares not the transformers as the purpose of the hood is maintain the fire break of the ceiling to prevent a fire in the room spreading upwards through the building. We have a similar issue with in ceiling speakers but fit hoods to maintain fire seal of the hole, or 1Hr rated encolsed units.
 

[FONT=&quot] Most [/FONT]Bs standard transformers would have this
Thermal
automatic restart protection (turn off temp..≥100°C)


They
are designed for the enironment and do not impair the fire rating of the ceiling

Good practice would mean making sure there is room for heat loss

The fire rated integrity that needs supporting is the hole that has been cut and the method of reinstating that integrity
 

Reply to Part P opinion needed in the Australia area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
305
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
825
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
916

Similar threads

This situation is not uncommon and is absolutely nothing to lose sleep over. There are plenty of properties sold without the 'required' electrical...
Replies
5
Views
720
P
  • Article
CRM SOFTWARE - your opinions on the best few brands please Hi Everyone, I currently use E-Works CRM software and feels it does have good...
Replies
0
Views
355
plumb_know
P

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top