PaulM | Page 2 | on ElectriciansForums
Guest viewing is limited

Discuss PaulM in the UK Electrical Forum area at ElectriciansForums.net

GMES

Nearly Esteemed
Arms
Supporter
Joined
Mar 9, 2013
Messages
9,550
Reaction score
8,282
Location
Under the banana tree.
Met Paul for the 1st time today and all I can say is what a nice guy.
He was good enough to show me and Glennsparks round is latest project, although we couldn't get a coffee out of him!!

But on a different note we did manage to convince him he was talking to me on the phone for 2 minutes even though he was talking to The other Glenn.
Thats phase 1 of payback for operation Sunbed & swingers!!!!!
Nice to finally put a face to the name.
 
Always nice to put face to friends, just happened on this Micky Mouse site that you've seen. (any comments on that score please put it in the Arms gents). Things have been sorted out since that moment in time, still not happy about it and I will just drive off site again or just sling my hook once and for all. Pity, really good boss, really rubbish workers as you have seen (and heard lol). Frustration is the key word pmsl. Anyway it is a call center re-wire next week away from the muppets and working live is good.


Glen and Glenn, 05:00am start in the morning, I'm off to bed and do it all again......... Living the dream........
well all i`l say Paul is you`v got PM...

take a read of it before bed mate.
 
Paul hang in there mate and play the long game the Muppets in question are not worth it .
 
anyway..

talkin about drivin...
got to go out now....got callout as i`m on rapid response....

its the dreaded RCD tripping....lol..

wonder how long it`l take to find the cause....coo...

Oh yeah your the 4th emergency service , and remember mate if your struggling to find the fault, check for flapping leaves or ring JRC lol
 
Paul hang in there mate and play the long game the Muppets in question are not worth it .

^^^^ Yes, totally agree^^^ Winning the Long War is better than Drawing a short immediate battle.


Anyway I've off to bed, 5 hours kip and back to work, you lot are keeping me up!!! I'll reply too these posts tomorrow.
 
^^^^ Yes, totally agree^^^ Winning the Long War is better than Drawing a short immediate battle.


Anyway I've off to bed, 5 hours kip and back to work, you lot are keeping me up!!! I'll reply too these posts tomorrow.
You can't leave your own party paul, look at the title of the thread!!!!
 
If the RCD trip turns out to be one of slippery, impossible to find ones then you can always start a thread for some advice :)
i could take my que from the railways...i suppose:


[ElectriciansForums.net] PaulM
 
Mmmm... he seems nice at first. The first time I met Paul he was nice and I trusted him. Then he locked me in his cellar...... never been the same since :freak: Eh Fritzy?

I let you out of the cellar didn't I? What are you moaning about? I remember you saying that you enjoyed the Gimp mask :ihih:.

Manda, great to see you back my luv, Mrs. M sends her love (although she is doing my head in at this moment in time talking about real wood flooring??? I dont care, just get it love lol).

Really hope that you stick around Manda, loads of things are happening on here and in real life. You will benefit from both, trust me. I need people I can trust and you are on the top five of my list. Your work load may increase in the not so distant future, big things may be happening, I'll find out soon.



BTW gents Manda is like a sister to me, top lass and a brilliant friend. If any one in the Greater Manchester area needs an Electrical Improver/soon to become a level 3 Electrician, she is the person to PM and ask.
 
Paul I thought you said she was ok but her poo smells:willy_nilly:
 
I remember you saying that you enjoyed the Gimp mask :ihih:.

Funnily enough Paul, I don't recall saying ANYTHING when you put that mask on me? I shake whenever I have to wear so much as a dust mask now! ;)

Give my love to Mrs M.

The ****ty situation we talked about seems to have gotten quickly better, for the time being at least. Am off doing the ECS test tomorrow, so once I've paid for the card, on site shouldn't be a problem :)

Ditched the painting and started sending some spec letters round local companies for a sparks mate job. Just wish I had a vehicle then things would be much easier, but if I can find something quick, I can start saving.....

Won't be on much after end of month as tinterweb being disconnected until the pennies are coming in, so make sure you ring me with wonderful news ;)
 
First time I met him he bought the breakfasts and a big mug of tea.
Btw Paul, that reminds me. I still owe you for that breakfast wrap.
He's a thoroughly good lad:)
Well, three men go to work better on a full stomach!

It was a bit of a penance for him being late :)
I was 5 minuets late from a 80 mile drive, I still had to buy breakfast for the lads lol???

Probably when you came into the carpark on 2 wheels in a 2 ton van Daft lad lol
No need to go to Blackpool Pleasure Beach for your rides, just be in a van with Glenn driving :willy_nilly:

it were rite....
Glenn, no it isn't :willy_nilly:

Paul hang in there mate and play the long game the Muppets in question are not worth it .
Things are really happening after today, I need your advice on this matter. Talk later.

And to add hopefully he will take his part p card with him lol
Glennsparks dose not need a Part-P Card. He has a tool vest!!! Dont think he has worn it since I told him that he looks like a right Part-P Pratt pmsl.
 

Reply to PaulM in the UK Electrical Forum area at ElectriciansForums.net

Similar threads

The challenge that you have with this is that you've no confirmed start point. Because you have a lack of an EICR you don't actually know what...
Replies
7
Views
510
T
  • Article
TTA Supports Lighthouse Charity and Appoints Mental Health Ambassador - From TTA TTA Supports Lighthouse Charity and Appoints Mental Health...
Replies
0
Views
106
The Tile Association
T

Recommended Sponsor News

Exclusive Forum Offer! Free euro 2024 wall chart for first 10 responses!

Hi everyone,

We have 10 exclusive Uheat EURO 2024 Wallcharts to giveaway for Electricians Forum Members! The first 10 people to reply YES to this thread - I will message and get them sent out to you just in time for this years tournament! GO GO GO

Quickwire Now Sponsor ElectriciansForums.net

I am sure you will join me in welcoming our newest sponsors of ElectriciansForums.net - Quickwire! They have decided to join us after seeing you guys discussing their products here. Now we have an expert on board that you can chat to @Quickwire-Sam who will be happy to answer your queries!

[ElectriciansForums.net] Quickwire Now Sponsor ElectriciansForums.net


@Quickwire-Sam said "At Quickwire, we're all about speed, safety, and reliability. We're a family-run business, and every Quickwire connector is proudly made right here in the UK, ensuring noticeable quality. In short, Quickwire is the fastest connection method on the market. Whether you're an experienced electrician or a DIY enthusiast, Quickwire makes electrical connections ridiculously quick and easy. We're passionate about blending British craftsmanship with innovation. If you have any questions or if there's any way we can help, please just ask me!"

PCBWay Now Sponsor ElectriciansForums.net!!

I hope you will all join me in welcoming our newest sponsor to the forum PCBWay! You can contact their friendly people by sending a message to @PCBWay who will be happy to answer your queries.

Welcome to the community and thanks for your sponsorship!

[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!

PCBWay provides services including PCB Prototype and batch Production, PCB Assembly (SMT), 3D Printing, CNC Machining, PCB Design, Electronics Modules Selling, etc. We are committed to meeting the needs of global makers from different industries in terms of quality, delivery, cost-effectiveness, and any other demanding requests in electronics.

[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top