Pet hates

[TaffyDuck]

Aplogies if this thread has been done before.

When you go to a job what are your pet hates that you find a previous sparks has done? :banghead:

 

[Fin170]

-Finding Parking spaces when working in old housing areas or general urban areas with nowhere to park, I'm much happier parking my wagon at a 45° angle up a muddy bank.
-Practically new installations missing bonding, unidentified circuits, fire alarm mixed with light circuits, general bad practise....
-Loft insulation

 

[SparkyDips]

cables pulled tight/left short making wiring impossible ie.fused spur(load)side, no circuit identification on dis.boards, cross threaded plate screws, plasterers filling boxes with plaster, ceiling grid guys leaving support wires half twisted ready to poke yr eye out, basically all other trades on site and Edmundson f###### Electrical they never have anything in stock FFS, if i want to be let down i would have gone to screwfix!!!!!!!!......................ok deep breaths.

:devilish:

 

[jumpin jax]

parking your van out of the way so you are not asked to move it and half way through the day someone says"can you move your van?"

 

[Plonker 3]

PAying Elecsa so I can notify jobs only for customers to ask why does the job need registering with LABC,

 

[SparkyDips]

parking your van out of the way so you are not asked to move it and half way through the day someone says"can you move your van?"

bloody annoying!!!

 

[trev]

How about when the gaffer asks "Can you pop into xxxxx and do yyy it'll only take 10 minutes on your way home"
Yeah right

 

[ipf]

Half baked specifications done by idiot designers or architects who don't know the first thing about electrics. Then waiting ages for on site meetings or answers:banghead:

 

[Kiers1970]

When you go see Customer, give a decent price, only to be looked at lime you've mugged their grandparents.

 

[trev]

The phrase "The electrician who came out yesterday said that bonding thing wasn't needed"

 

[ipf]

Dirty would be clients giving your quote to another to see if they can do better. Total ******s.

 

[plugsandsparks]

Mine are: 1.Nowhere to get a bacon sandwich
2. Vending machines i have to pay for to get a cuppa.....FFS
3. Circuits not labelled and or labelled in-correctly making me look a total plonker when i knock off the computers.
4. Clients buying **** and saying "I've already got the parts"
5 . All plasterers
6. All plumbers.
7. Builders who damage my cables - that would be all builders
8. HMRC's online tax stuff
9. Price of diesel
10. Bank charges
11. Clients who aren't ready when its convenient for me.
12. Suppliers who cannot get me a simple friggin isolater thats holding the whole friggin job up.
13. Price of wine and smokes :-(

 

[jase]

Twisted cables usually earths or all the earths in 1 sleeve

absolutley my pet peeve too, bad enough in sockets, but when you have to pull apart a whole fuseboard just to get an R1+R2 on one RFC :banghead:

 

[Richard Burns]

absolutley my pet peeve too, bad enough in sockets, but when you have to pull apart a whole fuseboard just to get an R1+R2 on one RFC :banghead:

I also found recently I had bad continuity results and tugged the cables in all the sockets and they did not move but found after two hours that the twisted together cables were lodging on the screws, but the screws were loose, thank you someone!

 

[Paul.M]

Other sparks using my tools for the wrong purpose and/or lossing them! (yes Matthew I'm talking about you if your watching).

 

[DurhamSparky]

know it alls....!! plenty out there...!!