Pictures of a call out. | Page 2 | on ElectriciansForums

Discuss Pictures of a call out. in the Australia area at ElectriciansForums.net

S

smiffey

Got to a chaps house where he said that the lights have stopped working in a room and he is getting shocks off the taps.

Got on end of my makeshift wander lead out earth on end put my t5's on the tap and was reading 230v... so asked if he had been messing around with anything, he said noooooooo i haven't touched anything so turned the power off and asked to see the lights that were down and found this pile of sh+t. [ElectriciansForums.net] Pictures of a call out.[ElectriciansForums.net] Pictures of a call out.[ElectriciansForums.net] Pictures of a call out.

surprise surprise he had been adding down lights to the room and did the normal thing of putting all the black together and all the reds together.. well done mate well in the process of trying to kill our self you have also taken wires out and put them on the water pipe and the the hell is the 6mm doing?

After asking what his electricians number was as i wanted to speak to him he finally found the balls to tell the truth. after looking closer the earth's were cut out on loads of the wires.
 
i completely agree with Phil i did enjoy it when the wife was kicking right off about trying to kill her and he was not to touch the electrics again. i know it wasn't helping but i also pointed out a few things to add to his telling off, a bit naughty but he deserves it. cadspark again your completely right there, it did take me ages to almost rewire the hole thing as he had cut the earth's of of a cupple of the wires and the terminations he did manage to bodge together was no good.
 
I think it was on here that I read about the bloke building a chair in his shed to electrocute his wife, but she worked out what he was upto... This is even better, she wont even suspect a thing. :30:
 
Hi Smiffey,
Thanks for the pictures, wow a bit dodgy to say the least.
What I find interesting is the fact that they seem to almost always say that they havent been doing anything!
This wiring just does itself.
Thanks again,
Best wishes
Rex
 
If you want to kill your wife the very least you can do is disconnect the main earth clamp on the water incomer, line to hot, neutral to cold and in the cu connect line to the busbar, do it right ffs. (did I just say that out loud?)
 
Sounds like a guy who tried to service his own brakes a few years ago...

Afterwards they were grinding and squealing so he took it to a garage. They asked if he'd done anything to it... "no, nothing at all" was the reply.

Mechanics took the wheels off to find the brake pads fitted backwards!
 

Reply to Pictures of a call out. in the Australia area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
381
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
959
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

The challenge that you have with this is that you've no confirmed start point. Because you have a lack of an EICR you don't actually know what...
Replies
7
Views
606
I have an "old school" electricity monitor similar to this one...
Replies
3
Views
201

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top