elgnarc
DIY
Can a PIR sensor be fitted on the wall of a shower room
Discuss PIR sensors in a shower room in the UK Electrical Forum area at ElectriciansForums.net
Yes, no, or sometimes.
PIR would have to be suitably rated for the zone of the bathroom it is located in.
the bathroom electrics should be rcd protected.
if there is steam in the room, a PIR may well be of little use. perhaps a microwave sensor would be better.
if it is for the light, then some lights have built in microwave sensors.
PIR would have to be suitably rated for the zone of the bathroom it is located in.
the bathroom electrics should be rcd protected.
if there is steam in the room, a PIR may well be of little use. perhaps a microwave sensor would be better.
if it is for the light, then some lights have built in microwave sensors.
Reply to PIR sensors in a shower room in the UK Electrical Forum area at ElectriciansForums.net
News and Offers from Sponsors
- Article
As the holiday season approaches, PCBWay is thrilled to announce their Christmas & New Year Promotions! Whether you’re an engineer or an...
- PCBWay
- Forum Sponsor News and Offers
- 0
- 731
- Article
Bloody Hell! Wishing you a speedy recovery and hope (if) anyone else involved is ok.
Ivan
- Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
Similar threads
- Article
PIR sensors in a shower room Electrical Advice
PIR sensors in a shower room Discussion ThreadPIR sensors in a shower room Electrical Advice
Can...
- Lou
- Tilers Forums - UK Tiling Forum.
- 0
- 172
The existing wiring shows both brown wires into the same terminal. One should be in the terminal it is in now and the other in the terminal next...
- stepheng74
- UK Electrical Forum
- 1
- 319
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
-
Mira Jump 8.5 kw issueI think I'd be checking voltages on the circuit with shower in use Look at board and pullcord...
- Latest: mickegh
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.