What is the cause if Mitsubishi PLC shows an "XY error"
Discuss PLC error in the Talk Electrician area at ElectriciansForums.net
What type of Mitsi is it? Q, FX?
XY error sounds like Input / Output error.
Can you stop the plc and run again?
XY error sounds like Input / Output error.
Can you stop the plc and run again?
Reply to PLC error in the Talk Electrician area at ElectriciansForums.net
News and Offers from Sponsors
- Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
- Sticky
- Article
Good to know thanks, one can never have enough places to source parts from!
- Electrical2go
- Forum Sponsor News and Offers
- 4
- 786
- Article
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
- Dan
- Forum Sponsor News and Offers
- 0
- 804
Similar threads
- Question
Check out the Automation Specialist course bundle at https://bin95.com/automation-training-bundles/
The PLC courses are based on Allen...
- natkingcole
- UK Electrical Forum
- 1
- 626
Induced voltage can be a bit of a red herring when using DVM my guess is somethings moist.
- Richard100762
- UK Electrical Forum
- 5
- 423
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Fault finding for display not working on water softenerIt maybe a case of the display has died, especially if the unit is actually working, but as...- Latest: mainline
-
-
How is 0.2s disconnection time met on TT?Okay thank you this makes sense… Was I right about how to meet the 0.2disconnection time? The...
- Latest: ppelec100
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.