Power tools from sheds | on ElectriciansForums

Discuss Power tools from sheds in the Electrical Tools and Products area at ElectriciansForums.net

Joined
Sep 19, 2012
Messages
543
Reaction score
193
Location
SW. London
Hi, would like to know your opinions of the quality of branded power tool (Dewalt, Makita, ect) from the big sheds. The reason I ask is because years ago it was often mentioned that the various tools sold from sheds are fitted with cheaper parts that have a limited life span. I bought a refurbished dewalt drill 20 years ago from a "independent" shop and its still up to the mark (although the batteries are not so good now). Have things changed since, do power tools from Screwfix for example last more than a year or two before something gives out ? Thanks
 
branded tools will have their own versions, some will be full featured for heavy duty trade use and more expensive, cheaper stuff lands in big sheds.
look up the models on manufacturers website and see the differences.
 
Hi, when i mean branded, I dont mean own brand, i meant Dewalt, Makita, bosch ect (Im not so good at writing , or replying to posts so apologies). In a nutshell how do you sparks, who use power tools day in day out, rate the ones from sheds, in comparison to ones bought from, I dont know, CEF ??
 
Bought a hitachi hammer drill (after finding it less overbearing than the bosch and broke fewer bits than the makita 'hides')from screwfix 4 years ago, it's blinding. had to get the switch fixed about a year ago but apart from that no complaints. Don't really know what you mean by 'sheds' tho.
 
By sheds I mean stack em high and sell em cheap places such as B&Q, Screwfix, Toolstation ect. For comparison sake lets take Mountfield lawnmowers; if you bought one from B&Q it would be a safe bet that it would not last as long as similar Mountfield from a specialist mower shop, because the internal parts are manufactured at the cheap end. Is this the same for big name power tools, is the point im getting at. Im not sure, things might have changed nowdays; 20 years ago I wouldn't be so happy buying any kit from B&Q for example for these reasons. I dont want to make anyone paranoid, just wanted to see how your finding the longevity of power tools from "bumper screwfix (or the like) deals"; cause theres a rather nice Dewalt combi drill at Screwfix for under ÂŁ100 and im tempted.
 
Sheds = B+Q, Home base etc I assume is meant. I don't think Screwfix is included.
 
My Milwaukee combi drill from toolstation is doing well after nearly 5 years. Well one repair due to a blown pcb component, but the repairer said that was probably bad luck as he had never seen it before. Milwaukee don't have tiered products though, just the one range that gets improved year on year.

Bosch have tiered quality products, but they code them green for DIY, blue for the pro range.

I know for certain that DeWalt have tiered products when you look at the stats for them. They frequently appear in screwfix and B&Q. They colour all their tools black and yellow so the DIY stuff is not easily apparent.

Yes Screwfix is a shed, it's the same company as B&Q. Garbage for cheap, and some quality products for way over the odds.
 
I don't subscribe that a manufacturer makes a model specifically for a mass retailer, if you check the model numbers they normally match whether you buy them from B&Q or an independent. What does change is that the mass retailers will sell a lower specification 'DIY' model rather than a professional model with say a metal gearbox and brush less motor. With battery tools the DIY market has no real need for 5ah batteries so you find a lower ah battery which are cheaper. The current Dewalt in Screwfix is ÂŁ99 but it is a lower end drill and has 1.5ah batteries. The positive side of buying tools from Screwfix is that when it goes wrong they just replace them!:) Saying that I have now started shopping around for my power tools on the net and buying from whoever is cheapest from the likes of FFX and Toolstop.
 
I need/want a drill with a professional spec and all metal gearbox ect, I like to be sure that if I drop it its not gonna break. Any good well known stores you can recommend ? If i asked in screwfix ect what the model it was, i.e DIY or professional, they likely wouldn't have a clue what I was asking. There seems to be less independent tool shops around now unfortunately; and the sheds dont really know what they are selling, and theres longer queues !
 
I need/want a drill with a professional spec and all metal gearbox ect, I like to be sure that if I drop it its not gonna break. Any good well known stores you can recommend ? If i asked in screwfix ect what the model it was, i.e DIY or professional, they likely wouldn't have a clue what I was asking. There seems to be less independent tool shops around now unfortunately; and the sheds dont really know what they are selling, and theres longer queues !

Do your research would be my advice. Are you tied to any brand through preference or wanting to use already owned batteries ?
 
I would lean towards DeWalt I expect cause my old XRP is still hammering away after 20 years, also have an older makita angle driver, and a bosch 24 volt, so no not really devoted to any brand; but would narrow it down to those 3. Im gonna take a look at Toolstop and FFX and make an executive decision, cheers all
 
Last edited:
Quite a few products are different in the sheds - I recall issues with Karcher Pressure Washers as B&Q pushed for a cheaper price. And the Dulux paint etc is not of the same quality there as a local Paint Shop.

With Power Tools, the likes of Makita have many many offerings in Combi Drills...it's best to find the tool you want and to look around - using that part number. It won't be any different (other than price) no matter where you buy it.

I've never found the sheds very competitive when it came to Power Tools though, the likes of FFX, Anglia Tool Centre, UK Tool Mart and many others are much better imho.
 

Reply to Power tools from sheds in the Electrical Tools and Products area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
381
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
959
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

This week at Electrical2Go we have a selection of NightSearcher products that are over 50% off! We even have a selection of NightSearcher Kanga...
Replies
0
Views
818

Electricians Tools | Electrical Tools and Products

Thanks for visiting ElectriciansForums.net, we hope you find the Electricians Tools you're looking for. It's free to sign up to and post a question yourself to find a tool or tool supplier either local to you, or online. Our community of electricians and electrical engineers will do their best to find the best tool supplier for you.

We also have a Tiling Tools advice from the worlds largest Tiling community. And then the Plumbers Forums with Plumbers Tools Advice.

Search Electricans Forums by Tags

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top