Pricing | on ElectriciansForums

Discuss Pricing in the UK Electrical Forum area at ElectriciansForums.net

H

Hawk

The house in question has all carpets lifted so easy access for running cables. So here's what I've done and to do. Materials were ÂŁ500.

1. 17 spotlights wired and fitted.

2. 10 additional points in kitchen (sockets, fused spurs, cooker switch) walls chased, conduit installed and wired.

3. 10mm bonding to main water pipe. Approx. 25mtrs.

4. 15way dual rcd consumer unit fitted to replace two old fuse boxes.

5. Extend upstairs ring to include 3 extra sockets. (surface mounted)

6. Corrected landing light borrowed neutral. Was pretty handy to do.

7. All sockets and switches to be replaced throughout. (Approx. 20)

8. 4 new light fixtures to install. Already wired.

9. EIR

As I always seem to undercut myself, I'm hoping that you guys could give me an idea.
I've estimated 60hours to complete the job. Based in N.Ireland and the job is about 30 miles away

Cheers
 
I don't understand the need for the bullet point list when you've given us your estimated hours and the price of all materials ?

ÂŁ500 + 15% markup.

60hours x hourly rate (or day rate if you do one)

I hope you mean EIC not EIR (EICR) ?

Then stick on a fuel cost - ÂŁ30/40?
 
If the job was local [say within 10 minutes driving] I'd go with ÂŁ1750 but as it's 30 miles away you'll be looking at an extra hour each day minimum just for travelling so even doing that very cheaply I'd add on ÂŁ100 for that, there's a fine line between making what you're worth and being undercut by someone maybe a bit less fussy though...
 

Reply to Pricing in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
438
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
1K
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

  • Question
It can be easy to lose the sequence of things. If the fused spur has a neon indicator and this isn’t coming on then I wonder if -the original...
Replies
6
Views
975
That will work fine as long as the Pirs use relay switching, some don't.
Replies
2
Views
525

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top