Quinetic Grid options / 25mm box?

[timhoward]

I'm just wondering if anyone knows whether any/all of the Quinetic grid switch modules fit in a 25mm back box?
It "looks" just about ok. But if it definitely doesn't it would be nice to know!

 

[Avo Mk8]

I've not done it, which doesn't help!
If Quinetic's drawing is to scale, the depth from the mounting face of the module to the rear is definately under 25mm.

 

[loz2754]

I'll nip downstairs and have a look...

 

[loz2754]

I'm back.
On a Click Mode switch plate, the Quinetic switch protrudes into a box by 19mm. Measured by me.

 

[timhoward]

I'm back.
On a Click Mode switch plate, the Quinetic switch protrudes into a box by 19mm. Measured by me.

Thanks so much for your trouble!

 

[SparkySy]

@timhoward this thread is of good timing as I have the very same situation in a couple of weeks and had gone for the Click option!
And thanks to @loz2754 for confirming that they will fit is excellent!
Thanks gentlemen!!

 

[timhoward]

This is my longest running job. I took the initial call on Dec 29th on the M25 driving back from visiting relatives at Christmas.
First fixed a rewire in Jan. Then it all stopped. Radio silence. Until about 3 weeks ago ‘we want to be be in for Christmas’ and a plasterer was finally engaged.
Still no boiler, heating only 1st fixed, no kitchen or bathroom.
Lovely people but not the most organised.
It’s been fun trying to remember where all the wires are.