regulations | on ElectriciansForums

Discuss regulations in the UK Electrical Forum area at ElectriciansForums.net

M

m1ck_b87

Hi all
Where in the regs does it state that when modifying an existing circuit does it state that on the modified part has to comply with 17th and the existing is ok to be left as it was constructed to previous regs
 
Not sure where exactly is the reg, but your own work must comply with a latest regs, that’s a fact.
Unfortunately from experience I can say that it is not uncommon that your work expends further into the circuit or installation ( earthing + bonding, Zs, loading, etc.), and you end up modifying more than previously thought.
 
Its so important they put it right at the front of the book! Section 1 if I'm not mistaken.
 
You need page 4 under Introduction to BS7671:2008

It states the following:
page 4 BS7671:2008 said:
The Regulations apply to the design, erection and verification of electrical installations, also additions and alterations to existing installations. Existing installations that have been installed in accordance with earlier editions of the regulations may not comply with this edition in every respect. This does not necessarily mean that they are unsafe for continued use or require upgrading

The accepted wisdom is that if you work on a given circuit, then you should ensure that circuit, as far as is reasonable and practicable, should meet the minimum requirements of BS 7671:2008, so if you went to a house and the lighting circuit has no cpc in the cable, then you should upgrade this if you work on the circuit because otherwise your work would not be compliant, however it is for the client to pay for this works, if they refuse, then you walk away.
 
Or you could be like me, I walk the earth finding people who have unsatisfactory installations and put it right free of charge.


So this is you then Stuart....Super Sparky!

[ElectriciansForums.net] regulations
 

Reply to regulations in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
321
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
848
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
971

Similar threads

  • Question
Personally I won't do fixed price work unless there is a clear spec for the job including things like smokes, data, TV whatever else the customer...
Replies
3
Views
776
  • Question
There is no reason for an item of fixed equipment to be on its own dedicated circuit just because it is fixed equipment. There may be other...
Replies
2
Views
481
loz2754
L

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top