Replacement Electrical Tools - Peoples Opinions | Page 2 | on ElectriciansForums

Discuss Replacement Electrical Tools - Peoples Opinions in the Electrical Tools and Products area at ElectriciansForums.net

Have been looking on ebay all day as last time I found my test kit and drill on there but were already sold. Went to the police and told them who said they would look into it but that was a complete waste of time as the did not do anything!!! I will happily buy my hand tools back if I find them on there!!!!
 
Have been looking on ebay all day as last time I found my test kit and drill on there but were already sold. Went to the police and told them who said they would look into it but that was a complete waste of time as the did not do anything!!! I will happily buy my hand tools back if I find them on there!!!!
Know what you mean mate but if you're sure they are your's take so,e mate around and beat your tools out of the scum who nicked em, vigilantism isn't the right way to go, but the Police are so concerned with Political Correctness and red tape, it's obscene.
 
I use mainly knipex for cutters and pliers etc. Wiha drivers and dewalt cordless gear. My bro had 3k worth of festool gear nicked recently, luckily a farmer found it stashed in hes field and handed it in to police and he got it back about 2 weeks later, but i doubt that happens to often! Worst thing about having your tools nicked is it stops you earning an honest living. Some people have no morals
 
Thieving tools is a declaration of war in my book. I retired my Kewtechniks and Irazolas only last year to my garage. Bought them originally from CEF in the early nineties so they did well and the side cutters are still ok although the screwdrivers have been abused. I checked out new cutters and screwdrivers at one of the Elex shows and was able to compare which ones worked and felt best for me and went with Knipex for both. Really pleased with their cutters as they're lightweight and well made although the screwdrivers aren't quite as tough as the old Irazolas which I think are Spanish made and are the same as Bahco?
 
Yep CEF is where I got my kewtech stuff also in the 90s. The pliers were a bit bigger than normal ones and I liked them like that. Have been told a lot of tools from round here end up at a local tool auction so I’m now pondering to have a look there but they don’t do viewings till Friday for the auction on Saturday. If you add up what is in your bag and to replace with the same quality it’s a lot. Guessed at around £700+ when I listed everything that was there with the volt testers, lights, socket sets...the list goes on. Wondering if I can last this week with with some old screwdrivers and some blunt cutters and go take a look. I even found one of those lovely reliable light up screwdrivers if I need to do check for safe isolation!!!
 
Sorry to hear about your tools going missing. I hate tool thieves.

I got a pair of klein tools pliers not to long ago. Actually pretty handy, the only sensible place to get them is CEF.

I've always preferred knipex, but I've found it painfyul when they go missing. NWS has been a good value alternative, but I don't think there's much in the prices difference these days. CK is ok but I think they are over priced for what they actually are, their side cutters with the stripping notches in them are pretty useful though.

I have wiha screwdrivers at the moment, comfortable and good value. I've got the slim line ones which are handy for deep set screw heads or terminals.

Without a doubt there is no alternative for knipex cobra grips. They are the nuts.

Most other things anything will do but if you want quality files hacksaws spanners, bahco are a good way to go.

Dewalt do a handy plaster board saw that folds and has wrasp attached to neaten up those socket boxes.

Another good buy is the bosch laser level, has a plumb line and is generally cheaper than the dewalt.
 
my basic hand tools:

screwdrivers..... irazolas : wiha slim interchangeables: snap-on ratchet.

side cutters and pliers.... bahco and NWS

grips.... bahco

spanners... snap-on
 
I always remove ladders and all the good stuff from the back of my van every time I pull up at the end of my working day.
I detest having to do it, and loading it all up again in the morning taking several trips from my front door to the van.
Every morning I look out the window to check my van, always with the fear a door may be hanging off or damaged.

Even so, it is becoming more common for thieves to strike in the day whilst parked outside the workplace.
A friend of mine having just replaced some of his kit from a recent van theft, again had a brand new stihl cutter stolen from a driveway he was working on the other day. He suspects a delivery driver.

I come to the conclusion that these people have no fear because of our ever so weak laws and what appears to be lack of interest from local plod nowadays (as well as lack of). Take things into your own hands and then you will meet the full force of the law, with the probability of the thief suing you and the possibility of you losing your home you have worked so hard for over the years.

In all honesty, what are you supposed to do if you do catch someone in the act? Phone the police, because we all know that by the time they arrive (if they arrive) it's all over. How many times have we heard a story about travellers having property in their compounds and the police being powerless to do anything about it?
I originally and naively thought our laws applied equally to everyone.

I got slated on a previous post as I rejoiced in the comeuppance of a reported thief. I honestly don't know what I'd do if I caught someone, but I know what I'd like to do or would like to happen to such people.
The longer the innocent pander and show forgiveness and sympathy to this scum, the worse it will get.

After a well deserved lay-in, I'm just off to check my van...........
 

Reply to Replacement Electrical Tools - Peoples Opinions in the Electrical Tools and Products area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
438
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
1K
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

Definitely find the mechanical clutch is better on the new one.
2
Replies
18
Views
1K
I would say it is more about the bits than the torque of the drill. I use high quality Fisch auger bits for drilling out mortices and peg holes...
    • Like
2
Replies
29
Views
3K

Electricians Tools | Electrical Tools and Products

Thanks for visiting ElectriciansForums.net, we hope you find the Electricians Tools you're looking for. It's free to sign up to and post a question yourself to find a tool or tool supplier either local to you, or online. Our community of electricians and electrical engineers will do their best to find the best tool supplier for you.

We also have a Tiling Tools advice from the worlds largest Tiling community. And then the Plumbers Forums with Plumbers Tools Advice.

Search Electricans Forums by Tags

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top