Ring Doorbell Pro Install

[Ben Heaven]

Hi,

We live in a new build property which is nearly two years old. Currently have a mains powered Doorbell Deta C3501 with built in transformer.

Have purchased the above Ring Doorbell Pro and need some help installing it. The current setup has power brown/blue going into a connector block on the Doorbell. The push button is using some Cat5e cable going to the outside button.

It shows Deta C3501 A/C 220-240V - 50hz

Image attached.

Any help is much appreciated.

Thanks

 

[ashrow]

I think the voltage required is AC but that existing door bell output is DC.
I am sure you need to purchase the extender chimer and also keep your battery charged at the door end.

get the wifi extender chime and a 2nd battery

 

[Ben Heaven]

Thanks can I just use the power from the existing doorbell?

The Ring Doorbell Pro doesn’t run off battery only mains power....

 

[MJPD29]

Is there not a transformer comes with it that suits it? What input voltage does the ring pro actually need

 

[Ben Heaven]

Hi,

It includes a transformer but has to be installed in the consumer unit...

I need one that can sit in my existing Doorbell?

Thanks

 

[Gareth Brookes]

You can use this model of chime from tool starion its byron776 it costs about £11 and is compatable with said ring pro

 

[Ben Heaven]

Great thanks!

So literally swap the current Deta one for this and the Ring Pro Doorbell should work fine?

Thanks for your help!

 

[Gareth Brookes]

Yep

 

[nonsparky]

Hi, Just checking if this worked for you, OP?