Rogue Installers

[Worcester]

Hi All,

What do you guys reckon is the best way to deal with local rogues?

I have just done a quick trip around 4 recent installs in our area, and without exception I can find serious fault with each and every one of them just from a ground level visual inspection.

The most common one by far is insufficent distance from either eaves, apex or roof edge, in some instances they are actually overhanging, the other faults are: large gaps unders slates (or tiles) as they have just put a slate back in instead of flashing (grinding out), mounting panels in landscape and anchoring them on horizontal rails on the short edge of the panels (some panels manufacturers may allow this, the one I photo'd was Sharp panels which will invalidate the warranty), badly weatherprooofed cable entries, generally shoddy wokmanship, and a blatant disregard for the Health and Safety Working at Heights regulations and guidleines (including using a JCB bucket at height to work in / from).

I feel quite sorry for the end customer as in their ignorance these installers have sometimes created a disaster waiting to happen.

So, my question is really twofold:
a) Who to report these installations to when I don't know who installed it.
b) How to protect prospective customers from choosing one of these guys (who because of their methods are always cheaper)

Any ideas? Becasue if we don't stop these guys, the whole industry will end up with a very bad reputation as soon as a strong wind blows.

 

[pembrokeshire]

The MCS database would know who installed them when issuing the cert ... maybe the REAL option?
You are right it does us no good !!

 

[mark da spark]

I agree with you Worcester.
We have noticed more and more systems popping up which seem to be installed in whatever way the installer wants, which is more often incorrect.

If we report them to REAL, how do we go about?

 

[SolarCity]

I'd say a phone call to MCS would be a better route than the REAL. And I agree with you, it IS important.

 

[mogga]

to find out who fitted it Knock the door and ask " Im thinking of getting solar you wouldnt happen to have the number of your installer And would you recomend them"

 

[Worcester]

@Mogga, often done that, and you know what, it is amazing how many of them can't actually remember the exact name - Great impresion they've left!

 

[topquark]

The problem is still that the law leaves this with the home owner, not the installer. So a call to building control would only end up back at the customers doorstep. The law needs to be changed so that the contractor is liable.

 

[poheZ]

yes and 9/10 the customer doesnt want the hassle

If it is the customers problem they should write to the installation company and to REAL.

 

[Worcester]

My concern is that unless something is done then the industry will be badly damaged.

The best people have to be REAL / MCS and they need to 'SHOUT' about some of their actions. Even if you check the news section on the REAL site, it's about the industry, not what they are doing / have done.

A list of Struck-off or Sanctioned ex-members would help, though if you download the REAL complaints process, they are only concerned with pre-contract, post-contract it just points it back to MCS, and I couldn't find a compaints / reporting procedure on the MCS website.

As I say, if we don't do something ourselves to help self-regulate the industry, the actions of a few bad installers will come back to bite us all. As I understand it the NICEIC make noise about rogues in their normal sphere of operations, perhaps it is down to NAPIT, NICEIC, Corgi et all to protect their own reputations else thay may lose their MCS accreditation abiltiy.

 

[malcolmsanford]

I always remember being told as an apprentice .......son it is the easiest thing in the world to find fault, just make sure that whatever you do is right, and that is all that you can do.

If it rains and the roof leaks then the customer will be getting the company back out, or they will soon get the reputation for shoddy work, if panels are overhanging the eaves, then that is building controls remit surely ....................

It's a strange set up this PV work, I've seen threads on here people asking about leads that nationals get and trying to usurp them, and now we seem to have PV police going around tearing other peoples work apart .............

I would never dream of going into someone home, and ripping someones work apart ..................if it was downright dangerous and could harm someone I would tell the customer and if they wanted to confirm my fears they should recall the installer, and can use my observations as questions.

To me it's like being back in school, look miss look how bad that is ..................my work is much better isn't it miss.

 

[SolarCity]

I would never dream of going into someone home, and ripping someones work apart ..................if it was downright dangerous and could harm someone I would tell the customer and if they wanted to confirm my fears they should recall the installer, and can use my observations as questions..

What about if a job is shoddily installed? Not dangerous yet not up to scratch? You don't feel obliged to tell someone that they've been ripped off?

 

[malcolmsanford]

Who quality control are we working to, your standard of " up to scratch" may yet indeed exceed some work you have seen, but the other token is that your "up to scratch" may not come up to standards of others.

There is a very fine line between offering professional advice and loooking unproffesional and insecure when your relating to another contractors work.

If I were invited into a house/office/complex to work and I found something that was down right dangerous, I would of course inform the client of my concerns. I would though recommend that they contact the installer and voice concerns of the work, they would be more than welcome to use my findings, but I would stress that they must let the original contractor have the oppotunity to comment and if neccessary carry out any work that remedies the situation.

In all my years in the contracting business I have seen work that a dyslexic Monkey would have put in better, and in many instances I have changed the install, but I don't think ever once have I "reported" poor work,

I know that Reg 134.1.1 calls for correctly installed equipment and the use of good workmanship, but the bottom line if the customer was happy with the install and payed for it, the look of it must be to the customers satisfaction. The technical side is of course a different thing, but as long as the roof don't leak then how can you say it is wrong, again if the panels overhang, that is BC to remedy.

Perhaps I'm just an old contractor, but in all my time in this industry all contractors helped each other, and in many cases recommended each other, if you were asked to do work that was not normally in your scope. PV seems to be a totally different concept.

 

[SRE]

I understand your point but think what most people are concerned about is being associated with dodgy companies. I think most people would just like to see the standard of installations raised so we can all benefit. It's not about putting down their work - more about encouraging other installers to "up" their game.

 

[malcolmsanford]

As I said in my OP, and it is a doctrine that i have tried to maintain, look after your own work and you will never go wrong, and it as never failed me in nearly 40 years.

I heartliy commend anyone trying to achieve the highest standards they can and if you can achieve an high standard then you will find you never want for work.

Our industry all the time I've been in it, as always had cowboys and poor standards of work, and I'm sure there still will be long after I go to that power station in the sky, but the natural evolution of things normally tend to weed these out and your high standards will always keep you in work.

I've only tried to give advice that my experience as taught me, there is a very fine line between trying to achieve standards and coming across as petty and insecure, when dealing with other peoples work. All I can advise is what I said in the first sentence, look after your own work and you will never want for work.

 

[SRE]

I always ask prices and usually get an answer - I'd never know whether we were in the right area otherwise and I think it's a bit naive not to take the opportunity. I've worked on both sides responsible for tendering and managing contractors for many years and then contracting myself. It's important to be aware of others shoddy work and to be able to draw attention to your own good work without pointing a finger BUT make no mistake when I was looking after million pound contractors to start off with they were all tarred with the same brush because some lazy installers (large nationals as it happens) thought they could make big bucks because they were a big company and no-one dared to challenge them. I was one of the few people who kicked them into touch in my area until they conformed to the required standards. Customers don't have that luxury and the last thing we need is another round fo Rogue Traders and Watchdog scaremongering about pv installers - that affects us all.

Maybe the question should be - how do we make sure the public know about the excellent standards that are out there ....