Running a radial circuit in bedroom. He | Page 3 | on ElectriciansForums

Discuss Running a radial circuit in bedroom. He in the DIY Electrical Advice area at ElectriciansForums.net

Sounds to me like the OP just needs/wants someone to say yes that's fine like that and carry on with it on knowing an electrician(so he hopes) says it's right so it must be

Otherwise he'd be asking the inspector/tester to help with the design surely?
 
I will be getting it tested after I've done it as I always do, I need to get the whole house tested anyway. Yes I have new breakers at the CU and will obvs be isolating so nothing is live whilst working on it.

If the CU was replaced in 2016. Your installation should of already been tested.
 
Thanks for the advice so far. I will be getting it all tested before its live. I am intending running the wires to back boxes and then getting sparky to connect into CU.
Ok so my first idea was a shambles. Would Option 1 or 2 be a better way to run the wiring?......

View attachment 37976

Can you tell us the rest of the information about the circuit you are designing, and not just a sketch drawing?
What is the Ze and predicted Zs, what reference method, calculated cable size, OCPD type and rating etc etc
 
Thanks for the advice so far. I will be getting it all tested before its live. I am intending running the wires to back boxes and then getting sparky to connect into CU.
Ok so my first idea was a shambles. Would Option 1 or 2 be a better way to run the wiring?......

View attachment 37976

Can you tell us the rest of the information about the circuit you are designing, and not just a sketch drawing?
What is the Ze and predicted Zs, what reference method, calculated cable size, OCPD type and rating etc etc
 

Reply to Running a radial circuit in bedroom. He in the DIY Electrical Advice area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
401
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
988
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

Joining the ends of the radials together to form a ring, and changing the circuit protection to a single 32A would solve the MCB overload problem...
Replies
8
Views
784
  • Question
One thing you may find is that it will most probably be a 6mm cable and to get two of them in to a terminal may prove to be a stumbling block if...
Replies
3
Views
1K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top