Running a radial circuit in bedroom. He | Page 4 | on ElectriciansForums

Discuss Running a radial circuit in bedroom. He in the DIY Electrical Advice area at ElectriciansForums.net

Hi Lee, don't think Mr Joe Public (no offence intended) realise the implications of DIY electrics, bung it it in if it works jobs a good un, lost count of the times I lost customers by telling them what they should have, the DIY stores have a lot to answer for with regards to safe electrical installations.
The problem with DIY is it can be made to seem to work correctly, reversed polarity, incorrect cable sizes, abominable workmanship, no earth connections and of course no testing other than switching on, if the light/appliance works job done no need to employ those rip off electricians. I have met these things, like most will have, carried out by otherwise intelligent but Scrooge like people, an Admiral, even a Lawyer, people who value themselves very highly when charging others but resent paying the proper cost of people who have been properly trained to do something they are incompetent to do.
 
I suspect handy is questioning the word adverse .....
Ok I will put it another way does he know the regulations regarding safe wiring zones horizontal and vertical to the sockets this is one of the things DIY'ers get wrong.
 
I can't see anything on this thread to sugggest he has any level of training so doubt very much he is versed with safe zones or anything else. Even 5 weeks teaches you that, and a look in the byb would've given him his answer so he doesn't have one of those either.
 
true. also, what's this part pee i hear some guys banging on about?

and what's with this LABC, is that London Area Bus Company?
 
and all these years i thought adverse was a rhyming poem in the commercial break.
 

Reply to Running a radial circuit in bedroom. He in the DIY Electrical Advice area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
391
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
975
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

Joining the ends of the radials together to form a ring, and changing the circuit protection to a single 32A would solve the MCB overload problem...
Replies
8
Views
783
  • Question
One thing you may find is that it will most probably be a 6mm cable and to get two of them in to a terminal may prove to be a stumbling block if...
Replies
3
Views
1K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top