Running coaxial cable from the loft to lounge | on ElectriciansForums

Discuss Running coaxial cable from the loft to lounge in the UK Electrical Forum area at ElectriciansForums.net

linuxthefish

-
DIY
Joined
Jan 2, 2012
Messages
49
Reaction score
4
What's the best way to run coaxial cable from the loft? On the outside or through the walls or floorboard/stairs somehow? They are plastered walls..
 
That's a very tough question to answer when you are the only one who's seen the house buddy!! I would have a good hunt around, there is usually a reasonable internal route somewhere. Airing cupboard etc.
 
No airing cupboard, It's a combi boiler. Most of the existing electrical bits are plastered over, but is it possible to run cable down the stairs under the floorboard?

Aren't you the guy who asked how to get into a loft through the hatch???

Yeah, but that's enlarged now! I don't remember being fully sober when asking that question either...
 
I've run an aerial coax from the loft to the lounge using the cavity in my sister old house, but that was years ago, and it was a nice straight route direct to where the aerial back box was to be positioned/used.

Just waiting now for all the plonkers that are going to come out and say you can't use the cavity because it causes damp etc!! lol!! ...It DOESN'T!!
 
Quickest way is outside, just drop it down to the room you want it in, but without knowing the house its impossible to say for certain.
 
Last edited by a moderator:

Reply to Running coaxial cable from the loft to lounge in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
303
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
819
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
896

Similar threads

  • Question
Better off with the click prw213 as it has twin screw termination.
Replies
9
Views
976
See there is the problem. I can put back to way it was. Is it safe, in my opinion NO!! It's wasn't safe before the incident. No Fused Spur...
Replies
9
Views
523

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top