Sb2500 g59

[sunnydayz]

Does anyone know if it is possible to change all the settings on a SB2500 to G59 settings using the grid guard code? or should we just fit a G59 relay???

 

[fitzsparks]

Why would you want to connect to the grid as a G59 installation with a SB2500, as it can't get anywhere near 16A?

 

[moggy1968]

as above?????????????????????????

 

[powervan]

perhaps he is fitting it outside

 

[sunnydayz]

Its not a single inverter! Six in total 16Kw system

 

[sunnydayz]

perhaps he is fitting it outside

why would fitting it outside make a difference??????

 

[daytona600]

if 16kwp fit one STP17000TL G59/2

 

[powervan]

sunnydayz wen u been on here as long as we have u will get it!

 

[sunnydayz]

Designed & Installed over 850kWp is that long enough?
Electrical engineer for last 25 years is that long enough?
Just got caught out with lack of equipment supply due to the friggin deadline, and had to modify system to suit availability (it is a single phase install so Tripowers wouldn't work) fitting a G59/2 control panel now,
just wanted to know if you could change all the settings using my grid guard code and save me the cost of a panel.

 

[SolarCity]

perhaps he is fitting it outside

To be honest, this went over my head too (?)

 

[moggy1968]

I've been on here a while and I don't get it!!

 

[powervan]

Ive not been getting it for yrs but thats another story!! 25yrs ur just a boy !! Im not explaining it !! At least someone got it change of subject bloody mcs website (nitemare)

 

[BruceB]

If the inverters are the SB2500HF, then yes, as you can connect by bluetooth you can change the individual parameters to G59 settings, but I do not believe they have G59 certification so you would probably need a separate G59 relay to satisfy the DNO.

If they are the older design, SB2500, then you cannot connect by bluetooth 'out of the box' so cannot easily adjust the parameters. However, looking at the installation manual it does imply that you can change the country settings etc with appropriate software and hardware so might be possible. Again they have no G59 certification so I think you will be forced to get a G59 relay.

 

[sunnydayz]

Thanks Bruce I was going to try with the SMA data lead and my grid guard code but didn't want to waste time on site so thought I would check on here first. Though I am pretty sure DNO will want a G59 relay.

 

[powervan]

Ive not been getting it for yrs but thats another story!! 25yrs ur just a boy !! Im not explaining it !! At least someone got it change of subject bloody mcs website (nitemare)

" get it now so it must be u lot NOT US)