P
provr6
System:
1 roof SE 8 x 195 panels (1.56kw)
1 roof SW 6 x195 panels (1.17)kw
tot sys 2.73 kw
Here are my inverter readings at 1pm today full sun on all panels no shading
Input A
1478 Watts being produced
276 V
4.7 A
Input B
1478 Watts being produced
229 V
1.0 A
the grid on both inputs reads 6.0A
Am I right in saying that the watts being produced is the total wattage of inputs A & B at all times? I was expecting the inverter to show the watts seperately as it flicked between the two inputs and for one roof to be less because of less panels.
Does the watts amount seem right given the size of the system?
Is the low reading of 1.0A on input B anything to worry about and why is so much different to the other input?
I estimate at the end of the day to have generated about 8kwh, which seems ok?, Yes/No?
1 roof SE 8 x 195 panels (1.56kw)
1 roof SW 6 x195 panels (1.17)kw
tot sys 2.73 kw
Here are my inverter readings at 1pm today full sun on all panels no shading
Input A
1478 Watts being produced
276 V
4.7 A
Input B
1478 Watts being produced
229 V
1.0 A
the grid on both inputs reads 6.0A
Am I right in saying that the watts being produced is the total wattage of inputs A & B at all times? I was expecting the inverter to show the watts seperately as it flicked between the two inputs and for one roof to be less because of less panels.
Does the watts amount seem right given the size of the system?
Is the low reading of 1.0A on input B anything to worry about and why is so much different to the other input?
I estimate at the end of the day to have generated about 8kwh, which seems ok?, Yes/No?