Schneider Complete Multimeter Kit

[richy3333]

Anyone else get a Schneider 'complete multimeter kit'?!

 

[Andy78]

You should ask Schneider how they think their "DIY kit" promotes compliance with GS38 and BS7671, or do they agree that such marketing leads to a false sense of security regarding amateur electrical alterations and the resulting safety of the work.

You know. Just for a laugh.

 

[haj]

View attachment 47692 Anyone else get a Schneider 'complete multimeter kit'?!

Yup I got one ! Owt for nowt thank you very much !!!

 

[Deleted member 26818]

A useful addition to the tool kit???

 

[telectrix]

looks like cheap chinese tat.

 

[Deleted member 26818]

Can get it for £13.99 from Amazon, or £58 from a chancer on EBay.

 

[Boing89]

Can get it for £13.99 from Amazon, or £58 from a chancer on EBay.

I wouldn’t go anywhere near 400v with a £14 multimeter.

 

[Moley]

I try not to go anywhere near anything with Schneider on it. Any company that can put this on their PV cubicles at solar farms should be avoided

And yes, I did work for them

 

[telectrix]

i was going to buy one of them schneider kits, but realised it didn't have a neon screwdriver, so sod it.

 

[Ian1981]

I hate everything about Schneider,DB’s etc so no chance!!

 

[DPG]

I wouldn't be putting those cheapy AA batteries in any of my kit either!!

 

[Spoon]

I always thought Schneider stuff was good.

 

[Andy78]

I hate everything about Schneider,DB’s etc so no chance!!

I always thought Schneider stuff was good.

Schneider is many many brands gradually brought under the schneider name, some good some bad.
I love the Acti9 range and think it is the best TPN gear available, but don't get on with their Easi9 domestic boards.

Even something simple like cable clips can be different. You get Thorsman (great) and Tower (awful) brand clips both under the Schneider banner

 

[Ian1981]

Schneider is many many brands gradually brought under the schneider name, some good some bad.
I love the Acti9 range and think it is the best TPN gear available, but don't get on with their Easi9 domestic boards.

Even something simple like cable clips can be different. You get Thorsman (great) and Tower (awful) brand clips both under the Schneider banner

I hate the TPN boards as I don’t like the earth bar location at the top of the board.
I don’t like clipping in the KQ range mcbs but they are safer perhaps to work on
I do like however their mccb panel boards with the slide and clip TMD range mccb’s

 

[richy3333]

Can get it for £13.99 from Amazon, or £58 from a chancer on EBay.

At those prices it will end up as a present for one of the lads!