Show us your best installs

[Paul.M]

Ok we have a really good thread on dodgy installs, how about we show the good ones that we all do?

It does not matter if you are a 1st year apprentice showing off a 3 plate light fitting or a time served Electrician with 20+ years under your belt and posting up 3ph sub stations. Lets show off our skills



I'll get the ball rolling, dont slag it off too much lol.

 

[Darkwood]

How long before the folklift hits one with a pallet given the proximity of the shelves

 

[Pete999]

Ok we have a really good thread on dodgy installs, how about we show the good ones that we all do?

It does not matter if you are a 1st year apprentice showing off a 3 plate light fitting or a time served Electrician with 20+ years under your belt and posting up 3ph sub stations. Lets show off our skills

View attachment 32783

I'll get the ball rolling, dont slag it off too much lol.

Rough old job Paul, only jesting very nice indeed.

 

[Leesparkykent]

nice install, shame about those proteus DB's tho.............:cool3:

 

[GMES]

This is a Dust Extraction system for A regular Customer, I can't take the credit for building it though lol I Managed to get my van in the picture to give it some scope.

 

[GMES]

Cheers DW,You are now officially the new Paul

 

[Darkwood]

Cheers DW,You are now officially the new Paul

Nooooooooooooo!!!!!!!!!!!!!!!!..lol

I just shoved it in Paint and rotated and saved and uploaded.

 

[davesparks]

I wired a posh shed for a mate:

And I installed a dimmer

Plus I also made a bit of set for a local college's drama festival entry

 

[gnselectricals]

Solar plant room from last year


Sent from my iPhone using Tapatalk

 

[djelectric]

And I installed a dimmer

Very tidy board work. That's amazing!

 

[Pete999]

Very tidy board work. That's amazing!

Very nice, but can you get shot of those cable ties?

 

[HandySparks]

Very nice, but can you get shot of those cable ties?

... and replace them with black waxed lacing tape.


Seriously though, crackin' job.

 

[7029 dave]

I wired a posh shed for a mate:

And I installed a dimmer

Plus I also made a bit of set for a local college's drama festival entry

Nice Micc, but out of shire preference, I always used 20mm couplers when terminating ends, less stress on the pot and conductors. Just how I was taught.

 

[davesparks]

Nice Micc, but out of shire preference, I always used 20mm couplers when terminating ends, less stress on the pot and conductors. Just how I was taught.

I normally do use a coupler for going in to a box like that, but that job was purely about the aesthetics so I chose not to add couplers as they would have looked a bit naff.
It's not clear from the pic but the glands are the extra long threaded ones (by accident) and are spaced out with brass washers before entering the box, so the pot is pulled back as far out of the box as I could get it without compromising the aesthetics.

 

[Mark42]

Not up to your full-time-pro standards of course, but here's my DIY PV install and home automation PSU boxes.