**Show Us Your Installs!!!**

[Spudnik]

Right chaps,

Due to a few unavoidable issues, we have lost the original thread and pics etc.

Sorry about that!!!

So, if you want to re-upload your pics then great, if not, give us something new!


Cheers!!

 

[Darkwood]

Id rat him out ...get a copy of his cert' take photo's and send them in... your catchment area more work your way and public safer.

 

[guest119]

Aye, do it, you know its the right thing to do.
Its not joiner work its leccy!!

Boydy

 

[Spearmint]

Yeah I'd report him. Why should he walk away with payment for that "work" when that could've been YOU walking away after doing a proper job?

 

[sythai]

Have said to customer I'll write him a report with before and after photos, same time I'll be contacting Elecsa. Just can't leave something like this, dread to think what else he has done!

Thank you for your support.

Cheers Sy

 

[Knobhead]

Of more interest, keep us informed of what ELECSA do. Or don’t do as is more than likely.

 

[High Tower]

Had to put a new sub board into a restaurant kitchen and drop 11 new feeds into the kitchen for equipment. We only had 2 nights to do it and there was only really room for 2 of us.

 

[Darkwood]

Nice and neat H' only comment if i was pushed to make one is grouping of the SWA's I would have done them in a 3x tri-foil arrangements for max' heat dispersion but im probably just been picky

 

[High Tower]

I wanted to try and get them all a bit flatter, the only problem being is where they come out of the wall just above the shot, because of stud work and noggins, it's a square hole that just fits the cables, so in the 4' of tray I diddnt really have the length to get them neater and flatter!

 

[Darkwood]

I hear you but as i said Im just scraping the barrel to find fault..... just in jest

 

[High Tower]

No mate comments are always greatly received!

 

[sythai]

Of more interest, keep us informed of what ELECSA do. Or don’t do as is more than likely.

Will do, let you know the outcome of it all

 

[Thefailsafe2012]

Had to put a new sub board into a restaurant kitchen and drop 11 new feeds into the kitchen for equipment. We only had 2 nights to do it and there was only really room for 2 of us.

Nice one!

I like working with those new hager DB's

 

[daviesjoe]

Hey,

Just started one today, would like feedback, see where i could improve.

"Don't be too harsh, im only an apprentice and this is my first time doing a new board complete "

Finishing it off tomorrow hopefully - when the breakers show up to site ....

 

[daviesjoe]

Hey,

Just started one today, would like feedback, see where i could improve.

"Don't be too harsh, im only an apprentice and this is my first time doing a new board complete "
View attachment 24100
Finishing it off tomorrow hopefully - when the breakers show up to site ....

 

[Richard Burns]

Hey,

Just started one today, would like feedback, see where i could improve.

"Don't be too harsh, I'm only an apprentice and this is my first time doing a new board complete "
Finishing it off tomorrow hopefully - when the breakers show up to site ....

So far so good for the cable dressing, not sure you will have enough room behind the busbar for those folded cpcs, remember to take the cable ties off once complete and tested.
Why is the board not covering the hole in the wall?