Single enclosure for RCBO needed!!!! | on ElectriciansForums

Discuss Single enclosure for RCBO needed!!!! in the UK Electrical Forum area at ElectriciansForums.net

SSE

-
Joined
Apr 20, 2010
Messages
410
Reaction score
45
I'm looking for a single enclosure that will hold an RCBO. Every one that my local supplier have are only big enough for an MCB! Anybody suggest a make or site where would be best to get this?
 
Out of interest what is the purpose of the white wire on the RCBO?
I know it connects to earth, but what I dont get is why?

With a RCD there is no earth connection - Im prob missing something very obvious so please dont shout!
 
Why don't the Memshield 3 RCBO's have the usual white "earth reference lead" as we are familiar with from Memshield 2 RCBO's?
Answer: The functional earth lead is only required in the very unlikely event of loss of a Neutral supply at the same time as an earth fault occurs (double fault condition).
In the event of an earth fault combined with loss of the Neutral supply, the likelihood is that the voltage (line to earth) will be suppressed by the fault and may well in effect be reduced below the lowest working voltage of the electronics (typically a minimum voltage of around 50V needed to power the internal circuits).
 
You could use one of the new RCBO's from GE which are the same size as an MCB. There was a post about these at the end of March, search for "new style RCBO"

Sounds good, I'll check it out!

or fit a 3 way box ( garage board type thingy ) and stick an RCD and a MCB in it.

This is last resort!

Screwfix / Electrifix have a wylex enclosure with din rain that will do it.

I'll check this out!
 
I can't seem to see the GE RCBO thread! Anybody help? Cheers.

EDIT: Found them. Look perfect. Thanks for everyones help.
 
Last edited:

Reply to Single enclosure for RCBO needed!!!! in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
275
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
773
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
779

Similar threads

  • Question
There could also be a completely unsuitable junction box embedded within the wall and tiled over or just cables in choc blocks in old accessory...
Replies
6
Views
980
  • Question
My thoughts exactly! Snowed under with work at the moment, so might have to pass it on 😬😬
Replies
4
Views
2K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top