Solar Eye

[PVKitsDirect]

Looks like there's room in the market for something better. Any recommendations?

 

[amdr]

Looking for assistance in setting up my Solar Eye.

First does it mater if the left or right RJ485 socket is used for connectio from the inverter to the Bee
when I try to connect Bee to Eye the wifi symbol flashes for a couple of seconds then stops and then when it returns to the display page there is no wifi connection shown any hints on where I am going wrong. I have tried it on all 5 channels with the same results

 

[infinity]

Set Mine up yesterday.

When you have selected channel 1, push the button, then you need to reselect channel 1 for it to start broadcasting!

 

[amdr]

Thanks for your fast reply. Can you just clarify for me the step I am missing.

I set the bee to connection state with the LEDs flashing. I then enter the channel setup on the Eye select channel1 press the enter button. The LED flashes on the enter button and the channel 1 signal flashes for a couple of seconds then stops. Is it at this point I use the left or righ button to select channel 1 again?

 

[infinity]

yes once back onto the home screen, i cant remember exactly, i had same problem, press on of the buttons and it then selects channel one! its not in the instructions! set to channel, then trial and error with buttons to see which selects the channel. then its starts showing production.

Would do mine again to see but its in loft and bit of a mission!