Some interesting results,

[p11jor]

Hi there,

Carrying out some alterations in kitchen so was testing before pricing.

Downstairs sockets 1 socket has no earth 1 socket has reverse polarity 1 socket had a zs of 468 ohm (the one next to it was 0.39 ohms)

I.R results of L-N=6.32 L/E=5.62 N/E=5.60Obviously I want to rewire this.Then I did a few more I.RsSockets upstairs. L-N=0.00 L/E=85.4, N/E=84.9, Lights upstairs. L/N=0.09 L/E=30.1 N/E=20.4 Lights downstairs. L/N=0.00 L/E=0.80 N/E=0.82 Sockets upstairs. L/N=0.00 L/E=85.4 N/E=84.9This has to be a rewire, my assumptions are diy as this is 16th edition board Its a empty property as client away in afgan, but I have locked of the installation, put signage on it and supplied a tempory supply for the builders who are working here.

How would you go about putting a letter together to a client? As they were just expecting a couple of alterations in kitchen.Cheers Phil

 

[p11jor]

Hi Murdoch it dosnt but have pointed out abit further back that there may be some loads wired from jbs like outside lights etc, I gave example of a kettle wired straight into double socket, I think floorboards are going to have to come up tomorrow and investigate jbs etc, this has been a diy job,

 

[Octopus]

Hi Murdoch it dosnt but have pointed out abit further back that there may be some loads wired from jbs like outside lights etc, I gave example of a kettle wired straight into double socket, I think floorboards are going to have to come up tomorrow and investigate jbs etc, this has been a diy job,

Nice, sounds like a bit of work to get it all spic and span. Have fun!

 

[p11jor]

Thankyou Murdoch and thanks for your help.