Spur from shower cable to a double socket ?? | on ElectriciansForums

Discuss Spur from shower cable to a double socket ?? in the Australia area at ElectriciansForums.net

S

Sav

Hi guys,
just a quick bit of advise needed please.

Just went to see a minor job and this is what the guy wants.

To add a double socket in his loft.
There is no other sockets there and the only cables are the lighing ones and a 6mm shower cable.
Now, would you or could you spur off the shower cable with a 13amp fused spur, and run a 2.5mm to a double socket??
The shower is has a 45amp mcb and the fused spur that I am putting in, is an RCD unit.
I advised him to come off a socket in the room below and feed the socket in the loft, but he does not want trunking in the bedroom, or the wall to be chased.
Thanks guys and take care,
Sav
:D
 
I advised him to come off a socket in the room below and feed the socket in the loft, but he does not want trunking in the bedroom, or the wall to be chased.
Thanks guys and take care,
Sav
:D

The airing cupboard is normally a good cable route if you have a socket near to it to come off?????
 
Hi guys,
Thanks for all your answers and suggestions.
There is no cavity wall etc and also the airing cupboard is not another suggestion as its all pipes etc and not really easy for access.
I am going to tell him the only option is off the existing sockets and its going to be a chase up the wall or trunking.
But if he insists about coming off the shower, do you think it will be ok, as in down graded to 13amp fused spur and then fed into a double socket.
Safety is my concern, but also I want to be within the regs and obviously common sense as well. But customers see cables and most think "look,there are wires there, just add a double socket /switch " Doooh !!!!
thanks again guys for all your help
Sav
 

Reply to Spur from shower cable to a double socket ?? in the Australia area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
382
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
963
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

K
  • Question
Ah, I see. The op question is ambiguous, and I took it that he wanted to add a socket for a washing machine from and exiting switch fused spur. A...
Replies
10
Views
907
Luckily when I rejigged the socket to fit the fcu next to it, it meant the original ring wiring reached, i put the socket on the ring and took a...
    • Like
Replies
8
Views
1K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top