starting 2395 any advice welcome | on ElectriciansForums

Discuss starting 2395 any advice welcome in the UK Electrical Forum area at ElectriciansForums.net

Be one with GN3, get the terminology down to a tee and be able to write detailed descriptions of how to carry out ring finals, Zs testing, earth electrode testing, insulation resistance testing and the 3 different types of supply all with expected values, diagrams etc as atleast one of these will come up on your written and will be worth a large amount of your marks and will eat into your time in a big way so bullet points are the way forward and don't ramble either
 
As others have said
READ GN3 LOTS AND LOTS
Also read part 6 and 7 of regs especially 7 as special locations and zones etc comes up
also read GS38
Memorandum of guidance on elecy at work regs as I had a couple of questions on my 2391 regarding this you can download for free or buy
Learn how to write test procedures in bullit points with and without diagrams and calculations for Continuity of ring Final circuit testing
A lot of it is terminology
Practice calculations for
Resistances
how to calculate Rt for Insualtion resistance testing
Zs=Ze + (R1+R2) and if I sub board is included , Zs =Ze +(R1=R2 )sub main +(R1+R2) of the final circuit to give you overall Zs
The names of the various Test instruments for different tests and there test values
Earth Fault loop diagrams
You will learn a lot of what is required from your course but keep reading GN3 as it will help a lot
 
Its a tough course no doubt, I had little experience with testing at the time but I read GN3 at every opportunity and passed. Just read and read that's all the advice I can give you. Good Luck
 

Reply to starting 2395 any advice welcome in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
244
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
717
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
686

Similar threads

  • Question
Sorry for the late reply I found it very difficult to find work but I’m not sure if this was down to Covid and all the lock downs happening just...
Replies
2
Views
609
Thanks mate for the advice, this is just what I was looking for. I think I’ll have to put some thought into the domestic route due to the NVQ and...
Replies
2
Views
357

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top