Starting out tools list | on ElectriciansForums

Discuss Starting out tools list in the Electrical Tools and Products area at ElectriciansForums.net

S

Sussex2016

Hi I am about to begin an apprenticeship with a local company. I need to build up a basic tool collection but will need to start from scratch. ive found one overall CK set and wondered if anyone had any experience or advice on the kit.
many thanks

Junior hacksaw, 7.5m (25') ST tape measure, electricians knife, automatic wire stripper, 210mm (8ÂĽ") pocket level, VDE 125-250V AC mains tester, 16oz claw hammer, M3.5 x 6" rethreading tool, Redline VDE 185mm combination pliers, 175mm snipe nose pliers, 160mm combi-cutter, 7 x Dextro VDE screwdrivers (2 x Slotted (2.5 x 75 and 4 x 100mm), 2 x Phillips (#1 x 80 and #2 x 100mm), 2 x Pozi (#1 x 80 and #2 x 100) and 2 x 100mm Modulo) and tool bag.

[ElectriciansForums.net] Starting out tools list
 
Hi and welcome to the forum, I'm sure the lads will be along soon to give some advice and also good luck with your Apprenticeship.
 
Sussex, IMO although those CK tool kits are very nice, I would go for a decent tool tote, there are plenty to look at and build your tool kit up from there.
You need something for quick access and quick recovery.with the CK type you will be forever worrying about, have I put that bit in the right compartment, with a tool tote it's quicker, something I'm sure your employer will be pleased about, plus the CK looks naff, IMO just saying, PS not saying CK stuff is not any good, just don't like those daft zipper bags. Good luck with your Apprenticeship.
 
Sussex, IMO although those CK tool kits are very nice, I would go for a decent tool tote, there are plenty to look at and build your tool kit up from there.
You need something for quick access and quick recovery.with the CK type you will be forever worrying about, have I put that bit in the right compartment, with a tool tote it's quicker, something I'm sure your employer will be pleased about, plus the CK looks naff, IMO just saying, PS not saying CK stuff is not any good, just don't like those daft zipper bags. Good luck with your Apprenticeship.

With the greatest respect I have to disagree with you on this point. The CK bag has a couple of drop down flaps which means you can locate the tools easily.
 
With the greatest respect I have to disagree with you on this point. The CK bag has a couple of drop down flaps which means you can locate the tools easily.

It's only my personal opinion, personally I would not use them, with respect of course.
 
Worth registering for the trainee section if you haven't already. You'll need to to view the attached thread but hopefully helpful.

For what it's worth I started with one of those C.K. sets four years ago and have replaced most of it with other stuff. Some of it was rubbish and some was good but never suited me.

http://www.electriciansforums.co.uk/showthread.php?t=92466

Sent from my D6503 using Tapatalk
 
Wiha has an lboxx kit on Amazon for 70 was 60 earlier on in week,think someone bought them up and maybe relisted them. It has pliers long and snips screwdriver set, Allen keys. Add a hacksaw,hammer tape measure and pad saw, you should be set. Buy quality tools and covet them their are some tea leafs out there. Some big names such as knipex wera Bahco are good but I've managed with lower quality until finances allow. I personally don't like that ck kit. To expensive for the quality.
 
Last edited:
The tools you'll need will depend on the type of work you're going to be doing - as a general standard you'll need a medium flat and pozi screwdrivers, something for cutting and stripping cable; I use cable shears like these:
https://www.tlc-direct.co.uk/Products/BHJ1307.html
and I find a stanley knife is useful in most situations.

Most things can be fixed with a hammer, pliers are handy for terminating T&E, a pair of sidecutters for cutting what you don't want to blunt your cable shears on, a small and large adjustable spanner, a padsaw and maybe a set of short rods if you're going to be doing anything with plasterboard, and some good grips such as Knipex alligators for holding things.

If you're going to be doing a lot of domestic work you'll probably need a bolster chisel, boat level, a 'bashing chisel' for chopping out bits of wood, plaster, celotex etc. If you're cutting in a lot of boxes a box stencil can save time, and a rethreading tool if you're going to be going around after the plasterers.
For commercial work you'll probably need a hacksaw, file, maybe a bush spanner.

If you're going to be moving around a lot it's best to keep everything in a bag which is easy to carry, if you're going to be working in the same room all day a sturdy box can be used to sit on, stand on, or saw things on, but either way you'll need something with a storage space flexible enough to adjust your selection of tools to suit what you're doing.

As you can see there's a lot to consider; instead of going out and buying a load of tools you might never use it might be best to wait and see what you're going to need and build up your collection as you go. Nobody will be expecting you to start with everything - we haven't even touched on power tools, or even a voltage indicator which is essential for safe working.
 
that CK kit is a good starter kit.i have to disagree with pete. the beauty of kits like this are that youhave a place for every tool and know thatyougot them allback in.
 
As above, that kit is well overpriced for what it is.
If you are after a good solid box, the Stanley waterproof structural foam ones are top notch, and are at silly money at the big orange shed right now Stanley Toolbox (W)305mm (D)267mm | Departments | DIY at B&Q

Fill that with a half decent plier set, a half decent driver set, all the other bits that make up the CK set and I reckon you'll be at half the price that CK are asking.

I have used that toolbox for about 7 years and only just lately demoted it to tester carrying duties. It got so full of tools that every tool retrieval became a rummage. It should be more than fine for an apprentice with a small tool set though.
 
Apart from grips, cable cutters, and at some point in the future a voltage indicator, cheap and cheerful is fine. I'm still using the same VDE pliers and sidecutters I've been using for the last 10 years, got my insulated screwdrivers from Aldi and most of the rest of my tools from B&Q or the local clearance shop. Because I've built up my tool collection from scratch and bought what I need, I know exactly what I've got and have a good idea of what tool to use in any situation.
My tools might not be much to look at - they're not all the same colour or brand, but they look a lot better next to me in my bag than they would if some toe-rag pinched them.
 
Hi I am about to begin an apprenticeship with a local company. I need to build up a basic tool collection but will need to start from scratch. ive found one overall CK set and wondered if anyone had any experience or advice on the kit.
many thanks

Junior hacksaw, 7.5m (25') ST tape measure, electricians knife, automatic wire stripper, 210mm (8ÂĽ") pocket level, VDE 125-250V AC mains tester, 16oz claw hammer, M3.5 x 6" rethreading tool, Redline VDE 185mm combination pliers, 175mm snipe nose pliers, 160mm combi-cutter, 7 x Dextro VDE screwdrivers (2 x Slotted (2.5 x 75 and 4 x 100mm), 2 x Phillips (#1 x 80 and #2 x 100mm), 2 x Pozi (#1 x 80 and #2 x 100) and 2 x 100mm Modulo) and tool bag.

[ElectriciansForums.net] Starting out tools list
http://www.electriciansforums.co.uk/electrical-tools-products/109212-apprentice-tools.html

post 8&9 on the above link.

 
As a side note don't buy a veto till you have the tools to fill it. 160 pound hand bag to carry 40 pounds worth of tools. Spend your penny's wisely.
listen to this nugget of advice, the veto will break you back if you overload it as well.

a set of screwdrivers
hacksaw
setsquare
file
side cutters
pliers
long nose pliers
tape measure
tote bag
insulated crimpers (red,blue,yellow crimps)
water pump pliers x2
allen keys
hammer

(im sure im missed essential tools off this list)

cable shears are nice to have but not essential, concentrate on getting the other tools first, i was much like yourself
and had a better toolkit than a lot of electrcians when i was on my apprentaship


dont buy too much now depending on the kit you use you will need different tools, for example i carry torx drivers,security bits, square drives etc and loads of other bits.

had an electrician that has been in the game 10 years ask me what some of the tools in my bag are i used them daily for a couple years and he had never seen them before

Sent from my SM-G900F using Tapatalk
 
Last edited:

Reply to Starting out tools list in the Electrical Tools and Products area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
391
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
975
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Electricians Tools | Electrical Tools and Products

Thanks for visiting ElectriciansForums.net, we hope you find the Electricians Tools you're looking for. It's free to sign up to and post a question yourself to find a tool or tool supplier either local to you, or online. Our community of electricians and electrical engineers will do their best to find the best tool supplier for you.

We also have a Tiling Tools advice from the worlds largest Tiling community. And then the Plumbers Forums with Plumbers Tools Advice.

Search Electricans Forums by Tags

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top