static caravan supply at home | on ElectriciansForums

Discuss static caravan supply at home in the DIY Electrical Advice area at ElectriciansForums.net

S

smithgt

I'm looking at placing a static caravan in my garden for elderly relatives to live in.

I already have a SWA cable from the house fusebox to the garage fusebox, and the static caravan would be situated adjacent to the garage.

Typically these caravans are connected to a 16Amp supply, will this be okay in a domestic situation?

The cooker/oven/heating/ho****er would be Gas, so the main power drain/surge would be a Kettle, Ironing or Hair straighteners.

Will I risk exceeding the load to a domestic property from the gird? Can I just run a cable from the an RCD in the garage fusebox?

Thanks
 
Hi, Welcome to the Forum, for a faster response I have approved your thread in the main forum, when Admin is next online you will be given DIY access and the thread relocated, this will not effect any posting. :)
 
Its a static...so IIRC its not classed as a "caravan" in the same way the towable ones are...though I'm not near the book at the moment..

ahh stumlbed across a copy..
Section 721 Scope - Park homes and "mobile homes" are covered under the general regulations...
 
Last edited:
Yeah, a common misconception. Static Caravans are under the general requirements of BS7671 and are NOT classed as a special location.

Caravan Parks ... E.G. The concrete pads are under section 708.

Caravans (the towable type) and Motor-Caravans (the ones with the driving seat incorporated with the beds ect...) are under section 721.

As for the OP, general regulations apply and the earthing arrangement should be considered.
 

Reply to static caravan supply at home in the DIY Electrical Advice area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
439
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
1K
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

Just stick the 63amp fused connector before the Henley block , or Lucy block as you call it, and your all good, as for your 2nd point, , the...
Replies
1
Views
1K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top