Supplementry Bonding not connected. | on ElectriciansForums

Discuss Supplementry Bonding not connected. in the UK Electrical Forum area at ElectriciansForums.net

Joined
Apr 3, 2023
Messages
22
Reaction score
5
Location
uk
In my bathroom there is supplementary bonding of the bath, bath pipework, and basin pipework before it goes into trunking and exits unconnected in the shower unit (see photo). This I believe has never been touched since the property was built in 2001. There is no bonding on the bathroom rad.

The CU (recently updated) is now a split load with a 63A 30mA RCD feeding shower, sockets, garage, and cooker. The lights, water heater and smoke alarms are each on individual RCBOs. I understand any supplementary bonding is now a moot point due to the RCDs and RCBO’s.



However, back in 2001 I’m assuming this was not wired to spec?
[ElectriciansForums.net] Supplementry Bonding not connected.
7
 
Last edited by a moderator:
Going back to 16th edition, there........and goodness knows what trouble that would cause these days.
The updated CU should be to18th.
 
Ah the good old days... running 4mm G/Y all over the place in some scabby council house bathroom, everyone had a different idea what you were meant to be achieving resulting in some interestingly clamp adorned bathrooms and far too many cables pushed into tiny earth terminals..
 
Ah, the way it was.

You know, they still sell those annoying radiator clamps that grip the seam with an Allan stud, pierce the paintwork and introduce the most likely part to rust?


That was an oversite by the electrician during building…. Simply forgot to connect it.

Like you say, it’s a moot point now when everything is rcd protected.
 
I'm thinking of keeping the supplementary bonding for a belt and braces approach in case of a failed RCD. As I'm removing the electric shower, I'll attempt to pull through some 6mm CPC when I extract the 6mm T&E that comes down from the ceiling into the shower. The main bonding from the CU to the under sink pipes is present (MDPE from water meter), however there is nothing on the oil fired central heating supply or on any of the rads. A bit strange considering the neatness the sparky made of the first fix, the layout of the T&E in the loft is a work of art.
 
The chances of any problem without the RCD are minimal, including it extremely negligible......with the supplementary, on a kin to Hannibal Lector in Silence of the Lambs...........anything is possible!!!
 

Reply to Supplementry Bonding not connected. in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
403
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
991
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top