Electrician Jobs Supply to flats using Ryefield boards or mccb panel

[circuitsolution]

Hi all
We are doing wiring to 6 flats.DNO will provide 200 amps service head on ground floor.All Swas for flat submains come to the intake area on ground floor.
What is the best option for termibating those SWAs into individual switch fuses after Ryefield board or can i use MCCB panel.Do the manufacturers allow to use those panels at domestic properties.
Appreciate your help in advance

 

[J.C.E]

MCCB will struggle with discrimination
usually ryefield for flats

 

[davesparks]

MCCB will struggle with discrimination
usually ryefield for flats

Depends on the size and settings of the mccb, but it shouldn't be too hard to achieve discrimination.

 

[Leesparkykent]

DNO normally specify Ryefield or Lucy for BNO installation. And the the best option would be to use SWA glands to terminate the SWA's in to the switch fuses.

 

[circuitsolution]

Depends on the size and settings of the mccb, but it shouldn't be too hard to achieve discrimination.

Thanks a lot J.Ce

 

[circuitsolution]

DNO normally specify Ryefield or Lucy for BNO installation. And the the best option would be to use SWA glands to terminate the SWA's in to the switch fuses.

Thanks Lee Sparky

 

[Paul P]

Sorry to but into this, I also have a block of 10 flats plus 100A 3 phase landlords supply.

We have the ryefield board and SWA from the flats going into switch fuses. What sort of requirements are there for the provision of metering.

Will they be happy to pull the corespondent fuse in the Ryefield unit or will the need red heads next to the meter positions to make it idiot proof.

Meters are all going in the main switch room.

Thanks

 

[Leesparkykent]

Sorry to but into this, I also have a block of 10 flats plus 100A 3 phase landlords supply.

We have the ryefield board and SWA from the flats going into switch fuses. What sort of requirements are there for the provision of metering.

Will they be happy to pull the corespondent fuse in the Ryefield unit or will the need red heads next to the meter positions to make it idiot proof.

Meters are all going in the main switch room.

Thanks

who's the DNO?

 

[ipf]

Sorry to but into this, I also have a block of 10 flats plus 100A 3 phase landlords supply.

We have the ryefield board and SWA from the flats going into switch fuses. What sort of requirements are there for the provision of metering.

Will they be happy to pull the corespondent fuse in the Ryefield unit or will the need red heads next to the meter positions to make it idiot proof.

Meters are all going in the main switch room.

Thanks

Whatever you do don't f*** it up like this one.....

 

[Paul P]

The DNO is UK Power Networks.