supply to log cabin

W

webby_58

hello all

i have to get a supply to a log cabin and have the following arrangment :

TN-S supply in house
House CU MCB's no RCD
supply to garage CU via 16amp MCB (2.5 t/e) / garage CU has 63a 30ma RCD
approx 35mtr to garage and 50mtr to house in cabin approx 6 sockets maybe an electric heater and 1 light circuit

i propose to spilt the tails in the house into 100a henley block and take a new swa to the cabin. CU in cabin with 30ma RCD 6a MCB for lights 16a MCB for socket ring

my query is the cable size. do i have to use 10mm swa 3 core to provide the correct size earth ?

what would be the best way to do this also taking into account cost.

please help.......!!!!

thanks in advance guys.
 
As an aside with talk of RCD's as 'additional protection'....this does not apply to TT systems. 411.5.2 lists an RCD as the preferred protective device.....not additional protection.
 
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Advert

Advert

Thread statistics

Created
webby_58,
Last reply from
Hawk81,
Replies
97
Views
13,902

Advert

Back
Top