Surface flourcesent fitting wanted 4x 36W 1250mm by 625 mm

[UKMeterman]

I am looking to replace an existing surface flourcesent fitting 4 x 36W ft tubes with an external dimentsion of 1250mm by 625mm or nearest offer.

Thanks

 

[buzzlightyear]

What about panel lighting.

 

[Timbo]

Must be specials for a bakery......

 

[UKMeterman]

It is an existing surface panel in a domestic kitchen that I would like to replace without having to replace the ceiling paper.

 

[telectrix]

nearest i can find:

Retail Surface Modular Light Fittings | CEF

 

[SJD]

In a school with lots of 600 x 600 4x2ft fluorescent fittings, instead of changing to LED panels, I retain the housing and fit LED mains voltage tubes. I use a make of tube where I disconnect the ballast etc, and connect each tube to 230V. Although there are 2 pins at each end only one end is fed, the other end is a dummy connector. I think these exist for 4ft tubes as well.

Try this link: LED T8 Full Glass Tube 4ft • 22W • 4000K • G13 - https://www.cromptonlamps.com/Catalogue/LED/T8/Standard/LED-T8-Full-Glass-Tube-4ft-22W-4000K-G13-LFT422CW